3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Help getting voodoo 2 windows me to work
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1148524531

Message started by Wade Wortley on 25.05.06 at 04:35:27

Title: Help getting voodoo 2 windows me to work
Post by Wade Wortley on 25.05.06 at 04:35:27
Hi.  First time on this site and it looks like a good one.  I have a voodoo 2 and windows me.  I had this setup working great, but had to reload windows because I was getting errors ect..  I reinstalled drivers from the voodoo disk, and glide is no longer available.  In the system settings/control panel, it says the device is working properly, but also says no drivers are installed for it.  I click "find a driver" and it tells me that the best driver is already in place.  It seems like it needs to be "turned on" or something..  Can anybody help??  Thanks.

Title: Re: Help getting voodoo 2 windows me to work
Post by LuxKiller65 on 27.05.06 at 12:39:07
If you have an onboard graphics chip, disable it and then reinstall both your 2d and your Voodoo2 drivers. That's how I solved my problem, but it may be something else in your case.

Title: Re: Help getting voodoo 2 windows me to work
Post by Wade Wortley on 28.05.06 at 19:57:06
;)
Thank you!!!  I will give it a try and let you know.  

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.