Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Heatsinks and glue (Read 566 times)
whodovoodoo2man
YaBB Newbies
*
Offline


Cast a spell on you...!

Posts: 41
London
Gender: male
Re: Heatsinks and glue[IMG]http://img.photobucket.
Reply #15 - 27.07.04 at 17:37:24
 
Okay. that article makes perfect sense.

However if you had a silver base mounted onto a copper heatsink, you'd also find that this didn't conduct as well as an all silver heatsink (assuming you're rich enough to afford one!!).

However I bet it would conduct better than an all copper one. Just as a copper/ aluminium heatsink will work better than an all aluminium one.

Manufacturers mix the metals for reasons of economy.

My heatsinks are just made out of bits of scrap brass and copper, and they work much better than the majority of overpriced and over engineered commercial offerings.

...

...

...

...

Andy

Back to top
 
 
IP Logged
 
janskjaer
Ex Member


Re: Heatsinks and glue
Reply #16 - 27.07.04 at 21:56:24
 
Nice work there!  Grin Those brass pots look really cool! I've seen something very similar being used on a Voodoo2 before, with the 3-way outlets on each pot!

Let paulpsomiadis have a look at these! He's seriously into his modding as well!  Grin He might take up your idea for his Gainward Dragon 3000 SLI pair! If he can part with his beloved green heatsinks!  Wink
Back to top
 
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Heatsinks and glue
Reply #17 - 28.07.04 at 00:08:06
 
WHAAAT, remove the heatsinks from a Gainward Dragon 3000! Shocked Shocked

SACRELIGE I tell you! Cry

We'll have none of that here thankyou...heheheh! Roll Eyes Grin

@whodovoodoo2man - D@MN! some L33T water cooling mod's you got kickin about there! 8)

VERY nice work! Wink

Maybe we should have a thread in the  "this 'n' that" area to showcase MOD's (3dfx or otherwise...) ???

Just an idea! Tongue
Back to top
« Last Edit: 28.07.04 at 00:08:29 by paulpsomiadis »  

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
janskjaer
Ex Member


Re: Heatsinks and glue
Reply #18 - 28.07.04 at 00:12:43
 
Quote:
WHAAAT, remove the heatsinks from a Gainward Dragon 3000! Shocked Shocked

SACRELIGE I tell you! Cry


Hehehe!  Grin I knew you'd say that! I know I could never get you to part with the 2 sets of green triplets you have there! Wink And I wouldn't expect you to either! They make the card what it is! And to stand out from the rest!  Smiley
Back to top
 
 
IP Logged
 
whodovoodoo2man
YaBB Newbies
*
Offline


Cast a spell on you...!

Posts: 41
London
Gender: male
Re: Heatsinks and glue
Reply #19 - 28.07.04 at 21:02:43
 
They'll never run as cool as my voodoo's though!  Tongue

BTW, the heatsinks are actually copper- just the pipes which are made from brass.

Here is an early pic of the then unpainted heatsinks-

...

They were made from scrap pieces of 22mm copper pipe.

The bases were bits of tube cut down the middle with tin snips and flattened out and linished smooth. The whole lot was soft soldered together with a small blowlamp.

Took about an evening to make all six heatsinks, and only cost a few pence in materials.

Andy
Back to top
« Last Edit: 28.07.04 at 21:31:10 by whodovoodoo2man »  
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Heatsinks and glue
Reply #20 - 28.07.04 at 21:58:40
 
We have the tools! 8)

We have the skills! 8)

We have the technology...we can rebuilt him... Grin

...err sorry I drifted off there! Tongue

Nice workmanship! Wink
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
3Dfx_tweaker
Junior Member
**
Offline



Posts: 85
The Netherlands
Gender: male
Re: Heatsinks and glue
Reply #21 - 29.07.04 at 22:35:11
 
What do you mean with rebuilt him?????
You want to make a NEW voodoo2???
Back to top
 
 
IP Logged
 
whodovoodoo2man
YaBB Newbies
*
Offline


Cast a spell on you...!

Posts: 41
London
Gender: male
Re: Heatsinks and glue
Reply #22 - 01.08.04 at 12:42:44
 
The reason I watercooled my Voodoo 2 cards was because of crashing. This was happening in a very modest Pentium II system, so heaven knows how it would have got on in a Athlon based system.

When really pushed, I found the SLI arrangement didn't lend itself well to free flow of air- cards are much too close together.

Plus I hate the racket lots of fans make!!

At the same time, I decided to upgrade my computer, this involved the purchase of a Athlon 2600XP, 1GB RAM, MSI Nforce 2 mobo and a Geforce 4 4600 TI (freebie).

I figured this system would be noisy using conventional air cooling, so investigated watercooling.

The systems featured on the market are over engineered and cost a small fortune, so I built my own.

Took a bit of thinking out and a bit of plunder in the scrapyard for a S/H Ford Transit heater matrix.

My System runs at between 10-15 degrees C above ambient, so most of the time that translates to about 35-40 degrees C (read using mobo/socket temperature sensors), equivalent air cooling seems to be about 10 degrees hotter.

My Voodoo cards no longer crash or lock up, and the Geforce 4 Ti card that was given to me due to it crashing my friends system (probably overheating looking at the woefully inadequate heatsink), runs as sweet as an angels kiss.

Next project- watercooled Athlon based glide box with Voodoo 5500.

Andy

Back to top
 
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Heatsinks and glue
Reply #23 - 01.08.04 at 15:32:41
 
@3Dfx_Tweaker - just in case you didn't know, the quote:

"We can rebuild him, we have the technology!" 8)

Is a quote from the 1970's T.V. series "The 6-Million Dollar man". Roll Eyes

T.V. trivia folks! Wink

==EDIT==

DOH! Shocked Embarrassed

Janskjaer is correct! Wink

Post has now been edited..(I've been making too many typo's lately...MUST...TYPE...SLLLOWWWERRR...) Roll Eyes Tongue
Back to top
« Last Edit: 02.08.04 at 04:51:21 by paulpsomiadis »  

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
janskjaer
Ex Member


Re: Heatsinks and glue
Reply #24 - 01.08.04 at 23:11:11
 
Wasn't that the Six Million Dollar Man?  Wink
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print