Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › 3dfx Section › 3dfx Drivers › Help I'm seeing green
(Moderators: gdonovan, FalconFly, NitroX infinity)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Help I'm seeing green (Read 124 times)
pugmom
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 1
Help I'm seeing green
19.10.02 at 23:39:26  
I have a voodoo3 3500 and when I try to run my 3dfx tv to watch with a vcr hooked up to the pod with rca cables all I get is green fuzz with red can anyone tell me what to do to fix this problem please..


Thanks pugmom Smiley Smiley Smiley
Back to top
 
 
IP Logged
 
Gump
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 3
Re: Help I'm seeing green
Reply #1 - 20.10.02 at 23:35:55  
I would check on the tab where you enable TV-out in display properties and make sure you have composite selected for the RCA cables. If that isn't it then try using an S-Video cable (if possible). And if that doesn't work you may be out of luck. I had a similar problem with the first 3500 I owned and had to exchange it after the 3dfx tech couldn't help me.

Good luck.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge