3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Tech Talk >> ntsc convert in pal format on voodoo rush http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1296255870 Message started by tnx on 29.01.11 at 00:04:30

Title: ntsc convert in pal format on voodoo rush
Post by tnx on 29.01.11 at 00:04:30

hello friends! today i have this question!
My card (intense 3d) voodoo rush based with tv out on ntsc format... for convert to pal is possible? ...if flashing the bios with last release pal version? resolve?

Title: Re: ntsc convert in pal format on voodoo rush
Post by Thandor on 29.01.11 at 21:11:26

The Voodoo Rush has a special chip for TV-out functions so probably you have to swap (or flash, if possible) this chip. I guess flashing the regular BIOS won't work.

Title: Re: ntsc convert in pal format on voodoo rush
Post by tnx on 30.01.11 at 00:02:25

Thandor wrote on 29.01.11 at 21:11:26:

The Voodoo Rush has a special chip for TV-out functions so probably you have to swap (or flash, if possible) this chip. I guess flashing the regular BIOS won't work.

on intergraph website is available for download latest bios card in two version: ntsc and pal.... help

Title: Re: ntsc convert in pal format on voodoo rush
Post by Thandor on 03.02.11 at 21:50:50

In my previous post I was assuming you also had to change the TV-out chip. I never tried it so I can't really tell what to do. Perhaps you can flash the BIOS and try if it works. If it won't start at all you might try to flash the old BIOS back by using a different PCI or ISA card.

Title: Re: ntsc convert in pal format on voodoo rush
Post by tnx on 03.02.11 at 23:55:54

Thandor wrote on 03.02.11 at 21:50:50:

I tried flashing the bios on a test-card! ....working, but not i have try for the moment the tv-out with new setting.
soon testing....