Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Voodoo 2 ram mod and vaporchill sli (Read 213 times)
WantToBuy
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 3
Voodoo 2 ram mod and vaporchill sli
25.04.06 at 11:26:23
 
hi every one i seen there has been alot cheap edo ram around i like to get some 125 mhz rip it off then upgrade the 12mb to like 24mb each for i guess if you able to get a 24mb 200Sbi card,, then  what be stop me say useing like 128 mb each card 2 v card is any one able to mod a bois for me, for ? Q2 is there any way for riseing the v core for the chip ,, by sotfware or hard mod
love to ask are there any 3dFx  tech here,  that could help me  for in Glide emulation  you able to rise the rez to 1600 X1200 so it is possable to   this rez  if you know any sotfware that edit bois for v2 i love to know of it,  or could some one , plz tell me were to get  any  24mb 200Sbi bois  thank you Smiley
Back to top
« Last Edit: 25.04.06 at 11:30:46 by WantToBuy »  
 
IP Logged
 
Chosen_One
Senior Member
****
Offline


Keeper of the BIOS-files...

Posts: 499
Germany
Gender: male
Re: Voodoo 2 ram mod and vaporchill sli
Reply #1 - 25.04.06 at 13:31:30
 
a voodoo2 does not have a bios...
and i do not know if it possible for a single v2 to address 24mb of ram! a x-24 (e.g.) can do it coz of two chipsets on one pcb...

the only possibility of tweaking the v2 is to replace the 100mhz with 125+mhz ram-chips! but then you need a v2 chip that can clock up to 125mhz! tm30 has the highest clocked voodoo2 at this board...ask him...

and AFAIK there is no vmod around here...tm30 searched for it a few months ago (use the search button!!!)...
Back to top
 
WWW  
IP Logged
 
elfuego
Senior Member
****
Offline


Searching for V5 6k...

Posts: 420
Aachen, Deutschland
Gender: male
Re: Voodoo 2 ram mod and vaporchill sli
Reply #2 - 27.04.06 at 08:07:08
 
Quote:
the only possibility of tweaking the v2 is to replace the 100mhz with 125+mhz ram-chips! but then you need a v2 chip that can clock up to 125mhz! tm30 has the highest clocked voodoo2 at this board...ask him...

Overclocking of the chip is no problem; memory was the limiting factor. Just add good heatsink combined with AS ceramique + glue and a 6" fan over everything and you're done. It should hit 125Mhz effortlessly Wink

But re-soldering the memory is a different story...
Back to top
 
278277112  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print