TM30
|
it runs with 1,5V and probably only AGP 1x (!)
Powerstrip says this:
AGP aperture - 128 MB AGP transfer mechanism - Deaktiviert AGP non-local memory - (n/a) AGP driving value - 88h (N-ctrl=8, P-ctrl=8 ) AGP revision - 2.00 AGP transfer rates supported - 1x, 2x, 4x Current AGP transfer rate - 4x Sideband addressing - Enabled Fast write protocol - (n/a) AGP texturing - hardware support, but currently disabled
Graphics card #1 ------------------------------------------------------------------------------ Identity - 3dfx Display controller Memory clock - 166,09 MHz Engine clock - 166,09 MHz IRQ - 11, not shared AGP revision - 2.00 AGP transfer rates supported - 1x, 2x, 4x Current AGP transfer rate - 4x Sideband addressing - Enabled Display driver - 3dfx16vs.drv, v.4.12.01.0666 DirectX driver - 3dfx32vs.dll, v.4.12.01.0666
But dxdiag says, that "AGP Acceleration is not available" look at my screenshot above...
EDIT: AGP 4x does NOT run! I tested all the time with 1x, then i set it to 4x... Windows runs fine, it detects 4x as you can see, but when i want to launch any 3d application the system hangs up! So NO AGP 4x Support with this V4... ???
|