3dfx Archive - agp2pci-doesn't work?

ps47

God Member

Offline

Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male

agp2pci-doesn't work?
11.11.09 at 22:50:23

got my hands on this little thing a couple of days ago.the trouble is,seems like I can't get it working no matter what..the fans (v5 5500agp+agp2pci) spin up,the card warms up as usual,but there is no video output (when using it as primary),and the card is not detected by xp either (when used as secondary)..agp2pci is set to use pci power,its molex connector is not connected (I was told that this is the proper way of using it).I have tried v3,v5 and r9200,all with the same result.

any ideas?

Back to top

3Dfx Help Page / 3Dfx Game Guide

IP Logged

razrx God Member Offline 3dfx Addict Posts: 839 Great Lakes, Canada Gender:	Re: agp2pci-doesn't work? Reply #1 - 11.11.09 at 23:17:57 Why were you advised to not use the Molex connector? I would think you would need to use it to get the card to work.
Back to top	IP Logged

ps47

God Member

Offline

Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male

Re: agp2pci-doesn't work?
Reply #2 - 12.11.09 at 00:26:50

I have seen it working that way a couple of years ago-agp2pci with v5 6000,running on nforce2 chipset,the power was provided via the internal hookup connector on the 6000,nothing else-I'm told that the previous owners have been using the adaptor this way as well.

if you can confirm that using the agp2pci molex is the way to go,I'll be more than happy to try it..

Back to top

« Last Edit: 12.11.09 at 00:45:22 by ps47 »

3Dfx Help Page / 3Dfx Game Guide

IP Logged

razrx

God Member

Offline

3dfx Addict

Posts: 839
Great Lakes, Canada
Gender: male

Re: agp2pci-doesn't work?
Reply #3 - 12.11.09 at 01:02:36

ps47 wrote on 12.11.09 at 00:26:50:

I have seen it working that way a couple of years ago-agp2pci with v5 6000,running on nforce2 chipset,the power was provided via the internal hookup connector on the 6000,nothing else-I'm told that the previous owners have been using the adaptor this way as well.

if you can confirm that using the agp2pci molex is the way to go,I'll be more than happy to try it..

Ok, I am seeing that you are correct.
I saw this post, it may help: http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=6256

Back to top

IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: agp2pci-doesn't work? Reply #4 - 12.11.09 at 10:31:03 tried all inits,still no go,seems like kt333 chipset (epox 8k3a+) is not compatible..I will try it on my 939dual later.too bad I don't have any nforce based mobos right now. edit: 939dual is a no go as well..might try to just sell it.
Back to top	« Last Edit: 12.11.09 at 12:08:04 by ps47 » 3Dfx Help Page / 3Dfx Game Guide IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: agp2pci-doesn't work? Reply #5 - 12.11.09 at 14:35:15 The agp2pci works ok. Just you must find a right motherboard. The problem comes with IRQ Conflict. Check your motherboard bios and try to find something like: Advanced PCI/PNP settings: * Allocate IRQ to PCI VGA. Regards, Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: agp2pci-doesn't work? Reply #6 - 12.11.09 at 14:52:46 I do have something like that (assign irq to vga) on the epox board,but I had it enabled..I will check out the 939dual as well. so this should be a matter of finding a compatible motherboard,do I understand it correctly?
Back to top	« Last Edit: 12.11.09 at 14:52:52 by ps47 » 3Dfx Help Page / 3Dfx Game Guide IP Logged

G1nX

Senior Member

Offline

Running NSK Guardian

Posts: 466
Romania
Gender: male

Re: agp2pci-doesn't work?
Reply #7 - 05.12.09 at 21:58:04

I also found that this adapter doesn't works well with just any motherboard for instance a on a MPX2466 the card I was testing would not display a image on screen. While on a more recent motherboard Asus P5WDG2 WS Pro in a PCI-X slot it worked without issues using the KSmoky driver set.

So I do believe that in your case you may also need to find a confirmed working motherboard with this adapter.
good luck,
G1nX

Back to top

Retro-gamer & VGA Collector
Powered by Voodoo5 6000

IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: agp2pci-doesn't work? Reply #8 - 07.12.09 at 22:12:05 thanks,maybe I'll get back to it,but it won't bee too soon-I have too much stuff on my hand right now,xmas are coming,gotta get a ton of stuff ready (moving to a new place in a few months),and I want to get back to school as well-would like to finish it before my hair starts to get grey
Back to top	« Last Edit: 08.12.09 at 17:38:05 by ps47 » 3Dfx Help Page / 3Dfx Game Guide IP Logged

vik YaBB Newbies Offline Posts: 24 hungary Gender:	Re: agp2pci-doesn't work? Reply #9 - 08.12.09 at 16:29:15 hi!! new mainboard : msi big bang. 2 v5 sli??? agp or pci= pciex,, http://www.iopanel.net/forum/thread31404.html
Back to top	IP Logged

goriath God Member Offline Ruggedized Retro Gamer Posts: 599 Italy/Slovenija Gender:	Re: agp2pci-doesn't work? Reply #10 - 08.12.09 at 19:18:23 vik wrote on 08.12.09 at 16:29:15: hi!! new mainboard : msi big bang. 2 v5 sli??? agp or pci= pciex,, http://www.iopanel.net/forum/thread31404.html I do not think so . Hydra bridge can manage only nVIDIA and ATi cards, or at least, PCIe cards, not PCI-X like Voodoo5
Back to top	OLD SCHOOL: Because it was done right the first time IP Logged

	Welcome, Guest. Please Login