3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1222512568 Message started by Tim on 27.09.08 at 13:49:28 |
Title: Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? Post by Tim on 27.09.08 at 13:49:28
Just realised by reading Gary's page, that I might have one of these, boxed and all that as well.
Take a look at the picture, is this the same one as being spoken of on this page? Sure looks like it? http://www.thedodgegarage.com/3dfx/index.htm http://4rsfng.blu.livefilestore.com/y1pnv_PnxWV4wq3OEVT11LHoAFPoDlsc1GO753omgjzqg02M6p4lH-QFUiXkDwO3Yb0I0ET68hs9r4/1998%203DFX%20Voodoo%203%203500%20TV.JPG |
Title: Re: Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? Post by exxe on 27.09.08 at 13:59:47
TC55 is 183MHz
1000/ the nanoseconds (1000/ 5.5) the link to gary s page goes to the index page |
Title: Re: Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? Post by NitroX infinity on 27.09.08 at 14:11:09
My Voodoo 3 3500 TVsi (as it is called) has 6ns memory and comes in a square white box.
If you have a manual it should say 'Voodoo 3 3500 TVsi'. BTW, the 166MHz version looks the same as the 183MHz version. |
Title: Re: Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? Post by Tim on 27.09.08 at 14:17:44
Manual just says TV, it's just a normal 3500TV then, oh well. :)
Thanks for the help. |
Title: Re: Is this the 166Mhz/6ns SDRAM Voodoo 3 3500TV? Post by G1nX on 27.09.08 at 16:57:27 NitroX infinity wrote on 27.09.08 at 14:11:09:
They do look the same except for the BIOS sticker. The more interesting 3500 is the 200mhz version with AAvid fan. |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |