| 3dfx Archive | |
|
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> unknown banshee http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1176565024 Message started by outlaw on 14.04.07 at 17:37:04 |
|
|
Title: unknown banshee Post by outlaw on 14.04.07 at 17:37:04
Hello again to the community,
got myself a nice agp banshee (no name pos). Got 2 questions. V.Control reports 1x agp (on both a 440bx and 440lx boards) and no 2x availability. Tried lots of drivers. Is this normal? Chip stops at 124mhz but memory can do 133Mhz (which is the max v.control allows whilst 3dfx tools can allow up to 130). Any way to try more? |
|
Title: Re: unknown banshee Post by paulpsomiadis on 14.04.07 at 23:45:49
A picture would help to identify the thing - if you have time, take a snapshot and upload it to an online image site... ;)
|
|
Title: Re: unknown banshee Post by outlaw on 15.04.07 at 10:36:56
Heh...found my answers with a bit of patience
The card is 1x agp....its made 1x and will stay like that forever. more than 133 mhz in v.control can be achieved via regedit in the memory speed string.....for the records hey did just up to 140mhz. |
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |