Welcome, Guest. Please
Login
Home
Help
Search
Login
3dfx Archive
›
This & That
›
This & That
› Data recovery help needed
(Moderators: NitroX infinity, FalconFly, gdonovan)
‹
Previous Topic
|
Next Topic
›
Pages:
1
2
3
Data recovery help needed (Read 540 times)
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #15 -
25.08.08 at 03:48:14
gtxe wrote
on 24.08.08 at 16:14:05:
fdisk /mbr
perhaps this is what you are looking for
edit:
http://support.microsoft.com/kb/69013/EN-US/
No dice.
RAID setup remember?
Back to top
Rampage is alive!
IP Logged
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #16 -
25.08.08 at 03:51:07
EDR Commander can see the partitions, repairing the MBR made no difference.
To be safe I ordered a new PATA hard drive, when it comes in I'll Fdisk it and format and use EDR to copy the partitions over to the new drive.
Once I make sure my data is secure I'll blow away the original drives and reinstall XP. I'm not going to run the RAID setup again, I'll just go to external storage with automatic backup.
Back to top
Rampage is alive!
IP Logged
IG88
Full Member
Offline
Posts: 209
Australia
Gender:
Re: Data recovery help needed
Reply #17 -
25.08.08 at 11:42:27
if repair install won`t work
install another copy of windows side by side on the same disk different directory or in the same directory replacing the original install
it will boot and the data will be intact
Back to top
Q9550 quad 4 gig ram Asus Pq5pro 2X Sapphire 4850
IP Logged
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #18 -
25.08.08 at 11:55:46
IG88 wrote
on 25.08.08 at 11:42:27:
if repair install won`t work
install another copy of windows side by side on the same disk different directory or in the same directory replacing the original install
it will boot and the data will be intact
Making writes to a disk where you are trying to recover data is a real bad idea if you want your data back.
Very easy to lose eveything.
I'd perfer to play it safe, over 10 years of assorted files plus other critical personal data at stake.
Back to top
«
Last Edit: 25.08.08 at 11:56:20 by gdonovan
»
Rampage is alive!
IP Logged
IG88
Full Member
Offline
Posts: 209
Australia
Gender:
Re: Data recovery help needed
Reply #19 -
25.08.08 at 12:22:34
personally never had a problem doing that
unless drive faulty or partitions are corrupted
alot of those MBR tools don`t do much good , tried alot of them
yeah safer using a good recovery program
Back to top
Q9550 quad 4 gig ram Asus Pq5pro 2X Sapphire 4850
IP Logged
sigtau
Junior Member
Offline
I'm Obsessed with 3Dfx!!!
Posts: 86
Houston, TX USA
Gender:
Re: Data recovery help needed
Reply #20 -
25.08.08 at 18:24:16
When you fixed the mbr at the recovery console, did you also run "fixboot"? I nuked the mbr on my Vista partition when I was messing around with installing OSX. I had to run both "fixmbr" and "fixboot" to get everything working again. It might be worth a shot if you haven't tried it yet.
Back to top
IP Logged
gtxe
Junior Member
Offline
v56k user
Posts: 54
germany
Gender:
Re: Data recovery help needed
Reply #21 -
25.08.08 at 20:12:59
gdonovan wrote
on 25.08.08 at 03:48:14:
...
RAID setup remember?
In mirrored RAID each drive should be the same as a single drive.
But I might be wrong.
Back to top
IP Logged
Thandor
Full Member
Offline
What's the fuzz all about?
Posts: 226
Re: Data recovery help needed
Reply #22 -
26.08.08 at 01:11:37
As FalconFly pointed out it's probably not the MBR. If it really was there would not be such a huge problem at all.
I would recommend imaging the disk first before you use recovery tools on it. Recovery tools can fix it, but can also cause more damage. Better is to use the 'dd' command (Google for 'dd', if you're not experienced with Linux be care full and read it twice) in Linux and make a 1:1 copy of the disk to a spare drive. Use the spare drive to try recovery programs. If you or the program screw up you can always create a new copy from the original disk
.
Back to top
«
Last Edit: 26.08.08 at 01:13:09 by Thandor
»
Click here to see my collection of CPU's and GPU's!
IP Logged
jandarsun8
God Member
Offline
Posts: 712
Minneapolis, MN
Gender:
Re: Data recovery help needed
Reply #23 -
26.08.08 at 01:51:54
The two programs I use for data recovery is EZ recovery which was mentioned before and Active Un-delete which helped me recover files from a software Raid-5 setup. Ontracks EZ recovery should work ok I would think. I've only got Ver 6 but PM me if you want to try it out.
Good luck
Jand
Back to top
IP Logged
paulpsomiadis
God Member
Offline
-=3Dfx still rox!=-
Posts: 2011
Newcastle U.K.
Gender:
Re: Data recovery help needed
Reply #24 -
27.08.08 at 00:38:50
@Gary - did you try testdisk?
Back to top
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
IP Logged
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #25 -
27.08.08 at 11:38:21
paulpsomiadis wrote
on 27.08.08 at 00:38:50:
@Gary - did you try testdisk?
I did not try that.
ERD Commander was able to locate the partitions so I'm content to wait for the new drive to come in before proceeding. If ERD copies everything over to the new drive and I can access the files then all will be good (I can always reload XP, no big woop)
If it doesn't work with either mirrored drive then I'll try something else.
Back to top
Rampage is alive!
IP Logged
paulpsomiadis
God Member
Offline
-=3Dfx still rox!=-
Posts: 2011
Newcastle U.K.
Gender:
Re: Data recovery help needed
Reply #26 -
28.08.08 at 19:02:32
testdisk should be able to fully rebuild the MBR.
Best thing would be to wait till you have a backup of the partitions "just in case" - then give testdisk a go.
Back to top
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
IP Logged
gamma742
God Member
Offline
3Dfx Gamer
Posts: 1668
San Diego, CA USA
Gender:
Re: Data recovery help needed
Reply #27 -
28.08.08 at 20:03:56
Quote:
ERD Commander was able to locate the partitions so I'm content to wait for the new drive to come in before proceeding. If ERD copies everything over to the new drive and I can access the files then all will be good (I can always reload XP, no big woop)
Sound promising.. Good Luck my Friend.
Back to top
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...
IP Logged
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #28 -
03.09.08 at 02:31:19
Looks like ERD commander is doing it's thing- I installed and formatted an IDE drive and the program is moving my files over!
I can clearly see the file directorys and names as they are copied over, life is good.
Back to top
Rampage is alive!
IP Logged
gdonovan
YaBB Administrator
Offline
Infernal Collector
Posts: 2361
Re: Data recovery help needed
Reply #29 -
03.09.08 at 03:59:09
SUCCESS!!!!!!!
Back to top
Rampage is alive!
IP Logged
Pages:
1
2
3
‹
Previous Topic
|
Next Topic
›
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
General Section
- News
- General Discussion
3dfx Section
- 3dfx Drivers
- Games
- Tech Talk
This & That
- This & That ««
- Marketplace
- Twilight Zone
« Home
‹ Board
Top of this page
3dfx Archive
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.