| 3dfx Archive | |
|
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Banshee Video Problems http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1060311369 Message started by Kiwi on 08.08.03 at 04:56:09 |
|
|
Title: Banshee Video Problems Post by Kiwi on 08.08.03 at 04:56:09
I just bought a second-hand Banshee AGP card to upgrade my old PII 333. Some technical details:
Dell Dimension XPS D333 (Pentium II) Motherboard: Intel AL440LX When I boot up after installing the card I get one long and two short system beeps and the computer locks up. Can anyone tell me what this means? Card slipped into slot very easily so don't think that is the problem. Most likely card not compatible with hardware????? Someone please help............ |
|
Title: Re: Banshee Video Problems Post by Rolo01 on 08.08.03 at 09:52:11
I had the same problem when I tried to use a banshee AGP in my i815EP Board with a pentium 3.
You have to flash the banshee bios to the latest version. Get the bios here : http://welcome.to/3dfxbios But be carefull to pick the right one for your card, SDRam or SGRam. If you have questions, mail me at Rolo01@gmx.de |
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |