3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Games >> mount and blade http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1398973413 Message started by msdos on 01.05.14 at 21:43:33

Title: mount and blade
Post by msdos on 01.05.14 at 21:43:33

Has anyone ever tried to play mount and blade on 3dfx hardware, it has a DX7 mode and I'm betting it could be ran on a voodoo 5500 or 6000. I can't see it being to playable tho.

Title: Re: mount and blade
Post by ultima on 02.05.14 at 14:14:24

I never actually heard of the game...what kinda game is it?

is it this game:

https://www.google.nl/search?q=mount+and+blade+game&tbm=isch&tbo=u&source=univ&sa=X&ei=AoxjU8DAFYngOs7pgdgO&ved=0CDUQsAQ&biw=1920&bih=943

Title: Re: mount and blade
Post by Rolo01 on 02.05.14 at 17:29:39

I tested it some time ago.
http://www.forum-3dcenter.org/vbulletin/showpost.php?p=9764478&postcount=765

It works, but in windowed mode only.
Was somewhat slow on a 4500 PCI.

Title: Re: mount and blade
Post by ultima on 02.05.14 at 21:04:00

but with what cpu and rest??

if 5500 combined with opteron 2.4Ghz, then it should run just fine me thinks

Title: Re: mount and blade
Post by msdos on 03.05.14 at 19:49:33

The game only supports 2 cores, so if your CPUs are fast then it might play fine on low setting. But the game is vram heavy so it might not be the most playable. If I recall right the game's CPU requerments is a p4@ 2.4 or 2.8ghz. Tho I was able to play it on my old system p3 with a gt6600. If I can get my hands on a 4500 or 5500 ill give it a go too.