3dfx Archive - 512x384 on Voodoo2?¿¿?

	Welcome, Guest. Please Login

3dfx Archive › 3dfx Section › Games › 512x384 on Voodoo2?¿¿?

(Moderators: FalconFly, NitroX infinity, gdonovan)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

512x384 on Voodoo2?¿¿? (Read 324 times)

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	512x384 on Voodoo2?¿¿? 29.08.04 at 23:58:02 Hi guys! Well, my englih isn`t too good, but my problem is: Why in the properties of my Voodoo2 it appears to support the 512x384 resolution, but in games i can play only in 640x480 and 800x600, but can`t in 512x384 ??? What can i do? Help!! ???
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: 512x384 on Voodoo2?¿¿? Reply #1 - 30.08.04 at 00:14:29 Hm, as far as I know, the Voodoo2 does fully support 512x384 resolution. However, not all Games actually allow setting lower than 640x480 (VGA)
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	Re: 512x384 on Voodoo2?¿¿? Reply #2 - 31.08.04 at 14:37:01 I run games on 512x384 on my Voodoo1 without problems (quake1, quake2, halflife, nfs3, etc) but with my voodoo2 i can`t! ??? I don`t know what to do
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: 512x384 on Voodoo2?¿¿? Reply #3 - 01.09.04 at 02:01:04 Hm, at least Quake 1 should launch at any Resolution, using a Commandline switch. Example : glQuake.exe -width 512 ...should launch it in 512x384 on any Video Hardware.
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	Re: 512x384 on Voodoo2?¿¿? Reply #4 - 05.09.04 at 05:18:25 Quote: Hm, at least Quake 1 should launch at any Resolution, using a Commandline switch. Example : glQuake.exe -width 512 ...should launch it in 512x384 on any Video Hardware. It works with my Voodoo1, but with my Voodoo2 it doesn`t! I`m using the latest reference drivers.
Back to top	IP Logged

batracio Junior Member Offline An evil petting zoo? Posts: 69 Spain Gender:	Re: 512x384 on Voodoo2?¿¿? Reply #5 - 05.09.04 at 21:06:11 Quote: It works with my Voodoo1, but with my Voodoo2 it doesn`t! You never replied to my post... http://www.voodoo3dfx.com/Foro/viewtopic.php?t=192
Back to top	Why make trillions when we could make... billions? IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge