3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
This & That >> This & That >> Diamond Edge 3D 2120 http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1266678931 Message started by ultima on 20.02.10 at 16:15:30 |
Title: Diamond Edge 3D 2120 Post by ultima on 20.02.10 at 16:15:30
Hey guys,
I found myself in the possession of the abovementioned card and seem to recall it is somewhat rare to find, is that true?? cheers Pim |
Title: Re: Diamond Edge 3D 2120 Post by NitroX infinity on 20.02.10 at 16:48:55
Yes
|
Title: Re: Diamond Edge 3D 2120 Post by ultima on 20.02.10 at 17:42:51
and would anybody be interested in it, as in on this forum??
|
Title: Re: Diamond Edge 3D 2120 Post by exxe on 20.02.10 at 17:52:56
here
|
Title: Re: Diamond Edge 3D 2120 Post by ultima on 20.02.10 at 18:21:29
shall I put it in the marketplace section?? or do you send pm??
|
Title: Re: Diamond Edge 3D 2120 Post by RaverX on 20.02.10 at 18:27:36
Hmm...
ultima, where do you find those cards...over and over :) His V2, now diamond nv1, what else do you have ? |
Title: Re: Diamond Edge 3D 2120 Post by ultima on 20.02.10 at 18:37:44
well, I seem to have a nack for spotting these things and I like to see myself as your unofficial supplier. LOL
I can make a list of the cards I have now, I'll do that tommorrow. oh and before I forget, this is a Rev B, version 1.00 |
Title: Re: Diamond Edge 3D 2120 Post by blueshogun96 on 24.03.10 at 23:06:28
I know this is a bit old now, but I've been searching high and low for one of these!!! Did you ever sell it? If not I want it. God, I wish I would have found this thread before >:(
Or does anyone else have one they are willing to part with? |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 24.03.10 at 23:29:32 blueshogun96 wrote on 24.03.10 at 23:06:28:
I've got a spare one. :) |
Title: Re: Diamond Edge 3D 2120 Post by blueshogun96 on 25.03.10 at 06:08:57
Want to discuss this via PM?
|
Title: Re: Diamond Edge 3D 2120 Post by ultima on 25.03.10 at 08:29:02
well, I still have the card, but Exxe kinda wants it, so it is reserver for him.
|
Title: Re: Diamond Edge 3D 2120 Post by Tim on 25.03.10 at 14:17:00
I've sent you a PM. :)
ps. Just got a boxed one in, that's why I got a spare. Never had seen a 2120 or 2200 box before, so that was a nice surprise. Even comes with a Edge 3D optimized Decent edition amongst others. |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 17.11.10 at 14:34:28
I recently got one--EDGE 3D 2200 :P but it dosen't work >:( its said that this one is just for SEGA mainboard,not for pc(bios for SEGA???)but there's no differences between them,and dose SEGA board have a PCI slot???and Diamond made videocard for SEGA?? oh ,confusion :o
|
Title: Re: Diamond Edge 3D 2120 Post by Tim on 17.11.10 at 17:46:56 voodooban_cn wrote on 17.11.10 at 14:34:28:
Where did it say it's just for SEGA mainboard? Any pics? I might be interested in it. :) |
Title: Re: Diamond Edge 3D 2120 Post by paulpsomiadis on 17.11.10 at 19:00:23
@voodooban_cn - can we have some pictures please...would be interesting to see the SEGA dev board (even if it doesn't work) 8-)
|
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 18.11.10 at 01:54:31
[/quote]Where did it say it's just for SEGA mainboard? Any pics? I might be interested in it. :)[/quote]
yes,the vender(who is also my hardware-collecting friend) told me that this one can't be used in PC,but for SEGA only! (maybe taken from an old arcard i suspect or not)And i had compare it with a common 2200.but sure theres no diffs at all ::) i had try to upload pics but there's no upload button here,should i regist a blog first,and then quote the URL from Blog,right? Thanks! |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 18.11.10 at 02:14:29 paulpsomiadis wrote on 17.11.10 at 19:00:23:
oh sure,a miss upload last night,tonight i will try again, ;) but maybe disappointed to u ,as Exactly the same layout,same palcement,even the same lable on BIOS. :) |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 18.11.10 at 09:17:52
To me it doens't make sense. Why can this board only be used with Sega hardware whilst the whole point of the NV1 was to get "Sega hardware" for the PC.
Anyway, Imageshack for your image uploads will do fine. :) |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 20.11.10 at 13:43:44 Tim wrote on 18.11.10 at 09:17:52:
Hi Tim,I have tried several times to Imageshack,but no response at all,the page can not open. :'(and some else space to updata?thks. |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 20.11.10 at 14:38:38 voodooban_cn wrote on 20.11.10 at 13:43:44:
abload.de is another good one. |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 21.11.10 at 04:53:39 get the point,different to the common V1.00,this bios is VN1.00. |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 21.11.10 at 10:34:56
No go, can't see the pics lol.
|
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 21.11.10 at 15:14:26
o >:(
sorry,tim,abload.de dosen't work either,maybe due to the filter of the Firewall here,so i took pics to bababian.com(a pics gallery website from China),as it also supports pics-links abroad,and yes, i can see them there,but i don't know why just i see them,i think it will be alright till i get a valid pic-updata-place abroad. >:(God |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 21.11.10 at 16:58:00
Hmm, really sucks to be in China. :-[
|
Title: Re: Diamond Edge 3D 2120 Post by paulpsomiadis on 21.11.10 at 23:10:19
Try using this to bypass firewalls / filters...might work...
https://vvd1.net/ it's a useful proxy. (be sure to TYPE the URL into your browser as copy / paste won't always work) |
Title: Re: Diamond Edge 3D 2120 Post by exxe on 22.11.10 at 10:13:43 |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 22.11.10 at 14:04:37
Thanks exxe ;)
and thanks tim,paulpsomiadis,abload dose work now! :D |
Title: Re: Diamond Edge 3D 2120 Post by Tim on 22.11.10 at 17:22:15
I can see the pictures now.
Did a little digging, but what I found all points to just a different revision of the bios, and has got nothing to do with SEGA. This board should work just fine on the PC. If not, your board is dead. |
Title: Re: Diamond Edge 3D 2120 Post by voodooban_cn on 23.11.10 at 12:50:09
no,the board is just fine,and changed this VN1.0 BIOS with a V1.0,then the card worked well.so,this verson of BIOS is not for PC i'm sure,and what is it used for?--i don't know,the most likely scenario is that,it designed for SEGA equipments,i think. ;)
I dont know whether SEGA have several Arcards using a pc architecture such as our mainboards where this card can work with.and it's just my speculating ;) As far as I know,EDGE3D series card with a VN1.0 bios is not minority,so what's the "N" means?Maybe have to consult to SEGA or Nvidia,haha 8-) |
Title: Re: Diamond Edge 3D 2120 Post by oldskool on 25.06.11 at 21:27:38
ebay.co.uk 280698370935
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |