Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › General Section › General Discussion › Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
(Moderators: gdonovan, FalconFly, NitroX infinity)
‹ Previous Topic | Next Topic ›
Pages: 1 ... 4 5 6 
Send Topic Print
Voodoo5 5500 on VIA K8T800Pro ( AGP 4x ) (Read 3991 times)
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #75 - 19.03.09 at 23:01:05  
UPDATE:
Removed the notch key from AGP slot. Used verified Voodoo5 cards for testing. Results: The AGP Express slot present on ECS mainboards is compatible with AGP 2x (3.3v) cards but offers virtualy the same performance as a regular 33Mhz PCI slot.
A couple of screenshots:

...

...

Testing was done with no optimisations (BIOS, settings...) hence I guess the low scores.
Back to top
 
 
IP Logged
 
oldskool
Senior Member
****
Offline


I Love 3dfx

Posts: 398
uk
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #76 - 13.02.10 at 23:45:27  
Would it be possible to to provide 3.3v on a universal (no notches) slot 4x motherboard?

Has anyone tried modifying a riser card?

Note: I have no technical expertise in these matters as you can probably tell.
Back to top
« Last Edit: 14.02.10 at 00:02:15 by oldskool »  
Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #77 - 16.11.10 at 21:45:26  
Did somebody try a v5 AGP in a compatible LGA775 board with AGP Express slot ?
Only Komponent did this?

Wink
Back to top
 
WWW m14radu  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #78 - 07.04.13 at 12:21:22  
As I remember seeing nobody post about it, I thought dropping a line here:
For testing my 3.3V only 3dfx cards in my main rig I've been using for some time the Biostar K9T890-A9 motherboard with modded XGP slot (removed the pseudo-8x AGP notch).
I can confirm that it is safe and of better performance than my previous ECS MB with AGP Express.
...
Nice thing it can natively take the 939 socket dual core CPUs, still no money at the moment to buy one and running it with a 3800+ A64.
Back to top
 
 
IP Logged
 
Pages: 1 ... 4 5 6 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge