good news:

http://www.youtube.com/watch?v=FxTqqTnMRIg

voodoo5 5500 on ASRock 4CoreDual Sata2 with intel quadcore Q6600

Project is still in progress...
8-)

Thats great!!! Good job! Tell us how and post some results! If possible also post here:
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1304255863
Would be awfully nice of you :)

hello all,

as anticipated by m14radu  ;),

we mark a new 3DFX experiment:

3DFX Voodoo5 5500 & ASRock 4CoreDual-Sata2 New Experiment! - ForumZone.it :)
http://www.forumzone.it/showthread.php?p=174485#post174485

come and read and watch the video ...threads in English translation  ;)


Thanks to all. 8-)

This is amazing !
Good job ciacara !!!
:D :D :D

VERY well done m14radu! 8-)

This is ciacara project and succes..not mine  :)

is not true, it's thanks to you I discovered the possibility to operate with a voltage below the Voodoo ... you're the first, remember?  ;)  :)

Your project has given me the opportunity to realize this  ;)

And for this reason that the project belongs, in part, to you too!   :)



Thank you really!  :)

I'm happy that my experiment give you the opportunity to go a step ahead :)
The results are awensome !
I can say only that:  "Great work !" :)

Can you please tell us more about the card behaviour ?
How is running ? AGP4x or 2 x ?
How the voodoo is scalling with the quad core CPU ?

Please post also a 3dmark 2001 score.

Hello Radu,
thanks for the compliments  :)

For the 'agp 4x, all programs I have used the report as "Active AGP 4x"

For scaling ... I have no previous references... have a demo report me to do some tests and compare results? ... ;)

For the 3DMark, I make some tests and I post some pictures in the thread of 'experiment  :)

Questions that I had done, I replied in the thread  ;)

Greets Ciacara!

Congratulations on your hard work!  You have accomplished a great feat!  :)
I didn't want to mess up your nice thread on Forumzone.  I did some quick searching on this board and found there are some good docs on modding this motherboard.

Check this link out if you get a chance:  http://weblog.rockhall.ro/?p=1

Thank you for your congratulations  :)

I read the guide and I found some differences: ::)

1. The measurement points
2. Utility of VTT-Mod


I, the measurements of tensions ran them directly to the MOSFET.

According to the guide, VTT-Mod is useless ... my experiment, without the VTT-Mod does not work.


However, fortunately I have not continued to account for the various guides that are online, otherwise I would never be able to complete this Experiment successfully. ;)

Bye  :)

Perfect!  I'm glad you've done your research.  :)

"However, fortunately I have not continued to account for the various guides that are online, otherwise I would never be able to complete this Experiment successfully. ;)  "

I know what you mean.   :)