3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> Marketplace >> [W] Obsidian SB100-4440 http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1175930274 Message started by Tweakstone on 07.04.07 at 09:17:54

Title: [W] Obsidian SB100-4440
Post by Tweakstone on 07.04.07 at 09:17:54

Hopefully someone has one for me ;)

I allready have one, but one of my shade daughtercards must be defective. Without them, I have no probs installing and using the card, but with the shades on it, windows hangs when booting to the desktop :(

So if someone has a complete card or the shades for me, let me know :)

Title: Re: [S] Obsidian SB100-4440
Post by exxe on 07.04.07 at 10:32:07

[S] = selling

did you mean [W] = wanted ?

Title: Re: [W] Obsidian SB100-4440
Post by Tweakstone on 07.04.07 at 11:14:28

right, I was going for [S] = searching :-[
So then, this card is [W]anted :D

Title: Re: [W] Obsidian SB100-4440
Post by Tweakstone on 15.10.07 at 21:03:48

I'm still searching :(

Title: Re: [W] Obsidian SB100-4440
Post by gdonovan on 15.10.07 at 22:01:39

wrote on 15.10.07 at 21:03:48:

I'm still searching :(

I have two good shade modules, perhaps we could make a deal.

Title: Re: [W] Obsidian SB100-4440
Post by Tweakstone on 15.10.07 at 22:32:17

Woohoo, that would be fine :D
In this case, I think I would join the Adrenaline Rush group buy if one is still free :)
Would you sell the shades or do you want my shades for display purposes in exchange (+ some extra bucks of course ;) ) ?
In this case I'll have to take em both, cause sadly I can't tell which one of mine is defective...

Title: Re: [W] Obsidian SB100-4440
Post by gdonovan on 15.10.07 at 22:36:08

I'll check the numbers to see how many committed people there are for the Rush boards.

Yes, I'd need the 2 suspect board for display, the only reason I purchased the spare 100-4440 I have is so I could try a shade module on my Quantum3D Rush ventana with shade connector.

Title: Re: [W] Obsidian SB100-4440
Post by Tweakstone on 15.10.07 at 22:48:10

Okay. I will try to find out tomorrow, how much it'll cost me to send my shades to you :)

How much do you want for the exchange?

Title: Re: [W] Obsidian SB100-4440
Post by gamma742 on 16.10.07 at 04:04:42

wrote on 15.10.07 at 22:36:08:

the only reason I purchased the spare 100-4440 I have is so I could try a shade module on my Quantum3D Rush ventana with shade connector.

How did that work out? It looked like a perfect fit.

Title: Re: [W] Obsidian SB100-4440
Post by gdonovan on 16.10.07 at 11:56:35

wrote on 16.10.07 at 04:04:42:

How did that work out? It looked like a perfect fit.

It was- The board would lockup on 3d applications, I assume that the driver needs to be modded or some bios issue.

Title: Re: [W] Obsidian SB100-4440
Post by ps47 on 16.10.07 at 15:36:36

maybe this could be helpful? http://cgi.ebay.com/Quantum3D-Obsidian-650-4400-02-PCI-8MB-w-650-0040-01_W0QQitemZ110179600978QQihZ001

Title: Re: [W] Obsidian SB100-4440
Post by NitroX infinity on 16.10.07 at 15:50:44

wrote on 16.10.07 at 15:36:36:

maybe this could be helpful? http://cgi.ebay.com/Quantum3D-Obsidian-650-4400-02-PCI-8MB-w-650-0040-01_W0QQitemZ110179600978QQihZ001

That's an SB50, not an SB100 ;)

Title: Re: [W] Obsidian SB100-4440
Post by Tweakstone on 16.10.07 at 19:12:42

Okay shipping to you would cost me 4-8€ (depends on the weight..) - how much would you like to have for the exchange? +how much shipping?