hello,
my problem :

i have asus p6t ws prof + v5k6 card + agp2pci adapter.
when i booting just after card's bios , i have "out of range" error with "...khz /...hz"

how can i do to fix my problem please ?

i test all 3 pci (pci 33 and 2 pcix) port but same error.

in my bios setup i can't chang pci to 33,33 but on motherboard i have jumper in auto mode and others jumpers are 100 and 133 for pcix.
when i buy my motherboard my card full work but now error...

I am kinda out of my element here, but wouldn't that be the card try ing to set the monitor to a refresh rate it can't support or a resolution or mode it can't support?  I've gotten that kind of error right in XP when trying to set the monitor to a resolution the card can handle but the monitor cannot. 

Hello,

I'm trevormacro with v5k6 card on falconfly board.
I clear CMOS of my asus p6t ws prof.
When i boot the v5k6 card pass the bios screen and on win xp pro all it's good but if i restart my pc same problem :

Out of range Khz / hz ERROR

I need Clear CMOS motherboard each time i restart....

How can i do ?

I test with pci 33 and pcix (66) but same error...

Please help me ?

It's not on windows but just after V5k6 1.16 bios screen.

1) try a different monitor
2) try V56k in a safe, known environment to make sure it works at all - if it works in safe environment, then you are out of luck
3) if it doesnt, then find some v56k bios, modify the default refresh rate, cross fingers and try again.

Good luck

I try a different monitor but same error.
I try different motherboard and it work.
I don't acces safe mode because i have error before my bios screen.
I don't want to flash bios because it's not this problem.
How can i do ?
my card full work on other pc just motherboard problem.

trevormacro wrote on 13.03.11 at 12:49:08:

I try a different monitor but same error. I try different motherboard and it work. I don't acces safe mode because i have error before my bios screen. I don't want to flash bios because it's not this problem. How can i do ? my card full work on other pc just motherboard problem.

You just answered your own question. Use a different mainboard, one which is compatible with V5 6k. V56k is pretty selective as you should be aware by now  ;)

i have gigabyte p35 ds4 motherboard and i test with my agp2pci and there is no problem but me i want to test with my asus motherboard.

but don't work.

Problem with my mb i think but what problem ?

That's what elfuego just said, it might not be compatible at all with your Asus mainboard, so if that is the case it won't run on it and you wouldn't be able to test it on it. 

it's compatible with my asus because when i buy it , it full work but now not...

did you use the agp2pci adapter then?  that could be the weak link. 

Did you update BIOS of your motherboard? Remove V56k, update your motherboard BIOS (if there is a newer one), disconnect the power cable from the plug, jump-reset the BIOS (use jumper next to the mainboard to clear CMOS), re-plug the system, enter BIOS and load setup defaults (do nothing else!), restart, plug in V5 6k and pray.  ;)

...and let us know how did it go :)

I flash my card with new bios and don't work too....

trevormacro wrote on 17.03.11 at 12:47:52:

I flash my card with new bios and don't work too....

Not the card. Flash the mainboard...