3dfx Archive - 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #195 - 22.11.13 at 13:27:48 I think on this picture, Motherboard is an Intel 'Seattle' SE440BX-2 Motherboards. Look this picture, right? Regards.
Back to top	IP Logged

EMPEROR Junior Member Offline 3dfx enthusiast Posts: 67 Germany Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #196 - 22.11.13 at 14:16:37 Yes, this is the correct motherboard.
Back to top	IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #197 - 22.11.13 at 15:46:18 That is not the same mobo, connectors at the back for audio and such are in different places. Btw emperor, did you read my.pm?? Edit I am blind it seems, is the same, just different color. Lol
Back to top	« Last Edit: 22.11.13 at 15:47:48 by ultima » 3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #198 - 22.11.13 at 16:29:13

ultima wrote on 22.11.13 at 15:46:18:

That is not the same mobo, connectors at the back for audio and such are in different places.

Btw emperor, did you read my.pm??

Edit

I am blind it seems, is the same, just different color. Lol

I think the shadow let you think it's not the same color.
95% it's the same motherboard.

Back to top

IP Logged

EMPEROR Junior Member Offline 3dfx enthusiast Posts: 67 Germany Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #199 - 22.11.13 at 16:33:18 It's not 95%, it's 100% the same board. What I was thinking though, was if there is a proof they actually managed to get Rampy stable on this board. They might just made it to compatibility testing, before 3Dfx was sold.
Back to top	IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #200 - 22.11.13 at 16:52:30

EMPEROR wrote on 22.11.13 at 16:33:18:

It's not 95%, it's 100% the same board. What I was thinking though, was if there is a proof they actually managed to get Rampy stable on this board. They might just made it to compatibility testing, before 3Dfx was sold.

I think 3dfx used this MB to test the first Revision A0 (like the one I have ULTRA RARE).

Back to top

IP Logged

EMPEROR Junior Member Offline 3dfx enthusiast Posts: 67 Germany Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #201 - 22.11.13 at 16:59:35 Yes, I know, but did they confirm Rampy was stable on it?
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #202 - 22.11.13 at 17:23:03 EMPEROR wrote on 22.11.13 at 16:59:35: Yes, I know, but did they confirm Rampy was stable on it? No 3dfx engineers said me it's stable on this MB. But I think it's stable on this motherboard because the engineers used this one to test the rampage A0 and A1. But in 2013 we need to test it.
Back to top	IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #203 - 22.11.13 at 17:48:54

I have one question:

The SE440BX-2 is AGP 2x only (not 4x).

is it support the rampage agp4x anyway with good voltage 1,5V?

EDIT:

I read that on internet:

The Intel(R) SE440BX-2 Motherboard complies with AGP revision 1.0. It
supports only +3.3V AGP-66/133 devices, therefore, it will not support
newer AGP cards (revision 2.0, +1.5V)

Perhaps it's for that in the lab (picture) the engineers used an AGP riser card up to the agp slot of the MB? to change the voltage.

Is it true?

Here is the pdf:

http://downloadmirror.intel.com/17782/eng/motherboards_desktop_se440bx2.zip

Back to top

« Last Edit: 22.11.13 at 18:10:03 by trevormacro »

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #204 - 22.11.13 at 19:32:52 Glad to see that the board is running and arrived safety. Did you manage to run some games and benchmarks on it ?
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #205 - 22.11.13 at 20:14:25 m14radu wrote on 22.11.13 at 19:32:52: Glad to see that the board is running and arrived safety. Did you manage to run some games and benchmarks on it ? Not now I don't have enough time to install Win98se.
Back to top	IP Logged

goriath

God Member

Offline

Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #206 - 23.11.13 at 03:29:17

trevormacro wrote on 22.11.13 at 17:48:54:

I have one question:

The SE440BX-2 is AGP 2x only (not 4x).

is it support the rampage agp4x anyway with good voltage 1,5V?

EDIT:

I read that on internet:

The Intel(R) SE440BX-2 Motherboard complies with AGP revision 1.0. It
supports only +3.3V AGP-66/133 devices, therefore, it will not support
newer AGP cards (revision 2.0, +1.5V)

Perhaps it's for that in the lab (picture) the engineers used an AGP riser card up to the agp slot of the MB? to change the voltage.

Is it true?

Here is the pdf:

http://downloadmirror.intel.com/17782/eng/motherboards_desktop_se440bx2.zip

It doesn't make sense, I think that riser is used to test AGP cycles. If they needed 1.5V for Rampage they would have used a 1.5V motherboard.

I could be wrong but, thinking at the period in which the Rampage would have come out it should follow 2.0 specifics of the AGP standard. This mean that Rampage should work as the Voodoo4, 1x/2x@3.3V or 1x/2x/4x@1.5V

Back to top

« Last Edit: 23.11.13 at 03:29:55 by goriath »

OLD SCHOOL: Because it was done right the first time

IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #207 - 23.11.13 at 12:21:48 Agree with goriath- the AGP riser you see in the pic is used for reading AGP register from Rampage. Rampage can be used in 3.3V or 1.5VAGP motherboards. - Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #208 - 23.11.13 at 12:27:20 So if i put the rampage on the intel MB with 3,3V, there is no risks to damage the card? Thanks Goriath and Oschar.
Back to top	IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #209 - 23.11.13 at 12:33:34 trevormacro wrote on 23.11.13 at 12:27:20: So if i put the rampage on the intel MB with 3,3V, there is no risks to damage the card? Thanks Goriath and Oschar. Nope, NOT DANGERUOUS. Not worry. It is safe motherboard for Rampage. - Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

	Welcome, Guest. Please Login