3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Is my V5 5500 dying?
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1315729382

Message started by Maf on 11.09.11 at 10:23:02

Title: Is my V5 5500 dying?
Post by Maf on 11.09.11 at 10:23:02
Hi there, yesterday when running UT99 with my Voodoo 5 5500 AGP I noticed, that the fps is lower than usual. I restarted the game but it didn't help. Then I took a look at the 3dfx hub and noticed, that I can't set AA to 4x. I'm almost sure I already read somewhere, that this means, that one of the chips is dead. Then I restarted the rig and voila, 4xAA is available again. I run UT99 and the fps was again normal.
Today I wanted to play UT99 again and again, the fps was lower and I could set only 2xAA in 3dfx hub. I did a restart, but it helped only after fifth time. So yeah, we can see here some weird randomness.
Does all this mean that one of the chips is dying and I should start looking for another 5500?

Title: Re: Is my V5 5500 dying?
Post by m14radu on 11.09.11 at 12:23:18
i suggest to reinstall the drivers.
I think that it's just a driver issue  ;)

Title: Re: Is my V5 5500 dying?
Post by akula65 on 12.09.11 at 01:34:58
If you are using fans (or some sort of active cooling) on the card, I would check to make sure they are functioning properly and that fan power connectors are firmly attached.

Title: Re: Is my V5 5500 dying?
Post by Cosmos on 18.10.11 at 07:47:55
Maybe the old caps : change them by new ones !

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.