3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Tech Talk >> EP-8K5AE,is it compatible with v3/5 agp cards? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1171889165 Message started by ps47 on 19.02.07 at 13:46:05

Title: EP-8K5AE,is it compatible with v3/5 agp cards?
Post by ps47 on 19.02.07 at 13:46:05

I'm thinking of buying this motherboard for use with my athlon 3000+ and my v3/5 agp cards,can someone confirm this combo is fully compatible?

thx ;)

Title: Re: EP-8K5AE,is it compatible with v3/5 agp cards?
Post by Eye-Q on 19.02.07 at 14:09:46

The KT333CF isn't compatible, it's AGP4x/1.5V only.

Title: Re: EP-8K5AE,is it compatible with v3/5 agp cards?
Post by osckhar on 19.02.07 at 14:14:14

Beware with the chipset kt333cf. It has not support to 3.3V AGP volt (kt333cf=kt400).

Oscar

Title: Re: EP-8K5AE,is it compatible with v3/5 agp cards?
Post by ps47 on 19.02.07 at 14:34:26

thanks,thats what I was afraid of.well,back to the drawing board (ebay,in this case) :)