3dfx Archive - v2 sli interlacing

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › v2 sli interlacing

(Moderators: NitroX infinity, FalconFly, gdonovan)

‹ Previous Topic | Next Topic ›

Pages: 1

v2 sli interlacing (Read 124 times)

outlaw

Full Member

Offline

Orbital Ring

Posts: 130
Greece
Gender: male

v2 sli interlacing
23.04.07 at 19:59:31

ok here is a problem I facing,

in sli mode with v2s I have in some case high image interlacing. The strange thing is that it doesn't appear in all cases and games. it is very clear in 3dmark 99 (1024x768, dx api) fifa99 (1024x768, glide api), RallyMasters (1024x768, dx api) but not visible in other games in same resolutions in both apis. First I thought it was the mismatching thing (2 non identical v2s with different ram timings like a dragon II and a creative) but even now that I have 2 orchids (identical to the bone) I keep see this annoying effect. Drivers are amiga merlin's l8st. Any ideas?

« Last Edit: 23.04.07 at 21:05:01 by outlaw »

&&&&[img]http://img254.imageshack.us/img254/963/userbar415

IP Logged

gtxe Junior Member Offline v56k user Posts: 54 germany Gender:	Re: v2 sli interlacing Reply #1 - 23.04.07 at 22:17:10 Is vsync disabled? If yes: enable it.
Back to top	IP Logged

outlaw Full Member Offline Orbital Ring Posts: 130 Greece Gender:	Re: v2 sli interlacing Reply #2 - 23.04.07 at 22:22:40 on/off makes no difference
Back to top	&&&&[img]http://img254.imageshack.us/img254/963/userbar415 IP Logged

gtxe Junior Member Offline v56k user Posts: 54 germany Gender:	Re: v2 sli interlacing Reply #3 - 24.04.07 at 14:38:13 With Q3D-100SB I had SLI-Problems. They were gone after disabling BIOS-, System-, Video- etc. -Cachings. Perhaps this can help ???
Back to top	IP Logged

paulpsomiadis

God Member

Offline

-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male

Re: v2 sli interlacing
Reply #4 - 24.04.07 at 20:27:26

This also happens on my V2 SLI set with the latest FastVoodooXP Gold drivers. Roll Eyes

I've put my V2 SLI set away now, but if I remember correctly, it's something to do with the registry settings for the V2 cards. Tongue

Both to do with RAM timing and "Primary/Secondary" SLI card selection... Tongue

Most V2 drivers NOW set the ram timing to 100Mhz or more - but it SHOULD be set to 90MHz to avoid "interlacing"...at least that was how I fixed it ages ago... Undecided

I had a program (somewhere) that could tweak all this stuff to fix the issue, but I don't know where I left it... ???

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+

IP Logged

gtxe

Junior Member

Offline

v56k user

Posts: 54
germany
Gender: male

Re: v2 sli interlacing
Reply #5 - 24.04.07 at 21:42:15

@paulpsomiadis:

do you mean this:

Quote:

^{...
5. Install the 3dfx Reference Drivers as describe in the 3dfx readme file.

If you experience display anomalies (corrupted images, purple colors) with the 3dfx Reference drivers, use the following Reg file for the Obsidian2 adapter to resolve these problems. In addition, after uninstalling the 3dfx reference drivers make sure to remove the registry entries as well which were made during installation.

the reg file mentioned above:

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\3Dfx Interactive]

[HKEY_LOCAL_MACHINE\SOFTWARE\3Dfx Interactive\Voodoo2]
@=""

[HKEY_LOCAL_MACHINE\SOFTWARE\3Dfx Interactive\Voodoo2\D3D]
@=""
"SSTV2_FT_CLK_DEL"="5"
"SSTV2_TF0_CLK_DEL"="7"
"SSTV2_TF1_CLK_DEL"="7"
"SSTV2_SLIM_VIN_CLKDEL"="3"
"SSTV2_SLIM_VOUT_CLKDEL"="2"
"SSTV2_SLIS_VIN_CLKDEL"="3"
"SSTV2_SLIS_VOUT_CLKDEL"="2"

[HKEY_LOCAL_MACHINE\SOFTWARE\3Dfx Interactive\Voodoo2\Glide]
@=""
"SSTV2_FT_CLK_DEL"="5"
"SSTV2_TF0_CLK_DEL"="7"
"SSTV2_TF1_CLK_DEL"="7"
"SSTV2_SLIM_VIN_CLKDEL"="3"
"SSTV2_SLIM_VOUT_CLKDEL"="2"
"SSTV2_SLIS_VIN_CLKDEL"="3"
"SSTV2_SLIS_VOUT_CLKDEL"="2"
...}

Info is from this site: rashly productions

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page