Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Agent500's Voodoo 5 6000 3700 ebay!!!! (Read 1062 times)
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #15 - 04.08.08 at 18:50:44
 
Heh, a molex mod - sweet! Smiley

As for my boxed V5500 - was won by some British bloke... Huh

(eBay I.D. kept secret for obvious reasons) Cool
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Tritop
Full Member
***
Offline


«» 3dfx Collector «»

Posts: 175
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #16 - 04.08.08 at 19:12:47
 
paulpsomiadis wrote on 04.08.08 at 06:44:37:
Shame the card doesn't have internal hookup. Undecided

You might want to consider getting that added - as the "Voodoo Volts" (whilst cool) are not a good idea. Tongue

Basically you would be running the card from an external PSU that has a separate Ground to the PC PSU - not clever! Roll Eyes

BTW - I like how the previous owner has tested for Clock speed vs BIOS number. Cool


Why is that a shame? In Agent500s opinion is every card with the internal hookup no original Voodoo 5 6000 anymore.

That card should be run with the voodoo volts. He wanted to keep it in the original shape.
Back to top
 
 
IP Logged
 
razrx
God Member
*****
Offline


3dfx Addict

Posts: 839
Great Lakes, Canada
Gender: male
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #17 - 04.08.08 at 20:28:37
 
Very true.  I had some good long talks with Agent500 and I think the same why he does.  I want to keep the card as close to factory spec as possible.  I really like the 3dfx stickers instead of the AAVID stickers.

I personally think that the Molex/1pin solution is the best out there. 
1 - no card modification
2 - no separate power supply providing (unsafe?) power
3 - only Kokohemmo has the same Molex adapter, so it's pretty rare, for a rare card.

Back to top
 

...
442747549  
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #18 - 04.08.08 at 21:51:16
 
Hi

I have made the molex power plug adapter and it works.  I have only tested it in short time.

I have also tested my voodoovolts and it worked, but in this case also just a testing for it. I had heard that voodoovolts may do voltage clitches, which may damage the card.


razrx: Be carefull if you are using the power plug connection. I don't know is that safe way to power up the card thru power plug for longer use. Anyways power plug connection with molex  should be more safier than voodoovolts.


Normally I power up my card internal hookup straight to the card with molex connection.


Regards
Kokohemmo
Back to top
« Last Edit: 04.08.08 at 22:14:02 by Kokohemmo »  

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
razrx
God Member
*****
Offline


3dfx Addict

Posts: 839
Great Lakes, Canada
Gender: male
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #19 - 04.08.08 at 22:12:24
 
Hey Kokohemmo!

Good to hear from you.  Thanks for the comments! 

It seems to me to make perfect sense though to use a Molex connector to 1pin as the Molex provides 12V power, which is what the v56k requires.  I'm assuming that 4.2amps is controlled at the 1pin adapter?
Back to top
 

...
442747549  
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #20 - 04.08.08 at 22:39:30
 
Hi again

I made my cable molex wiring just two wires. It might be good thing to attach the second GND also, as it is in Internal molex wiring.

...


Regards
Kokohemmo
Back to top
« Last Edit: 04.08.08 at 23:11:59 by Kokohemmo »  

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
razrx
God Member
*****
Offline


3dfx Addict

Posts: 839
Great Lakes, Canada
Gender: male
Re: Agent500's Voodoo 5 6000 3700 ebay!!!!
Reply #21 - 05.08.08 at 01:08:15
 
I think I will make a cable myself, hopefully better one.  I went to The Dodge Garage, and saw this info:

"Hank Semenec indicates his leads come from a ATX power supply to P4 Motherboard power adapter cable. The P4 motherboards have a mandatory square 4 pin power connector that is required for operation, hence the adapter for ATX power supplies missing them. A quick Google search shows many vendors with these cable for sale at a few bucks a pop. Lop the 4 pin plug off, ...."  (http://www.thedodgegarage.com/3dfx/v6k_faq.htm)

I have one of those 4 pin power connectors already, but where would I get a 1 pin 4.6Amp-12V cable and connector?
Back to top
 

...
442747549  
IP Logged
 
Pages: 1 2 
Send Topic Print