Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Ordered new motherboards (Read 149 times)
sb306
Full Member
***
Offline


I hate Nvidia!

Posts: 154
Fresno ca, U.S.
Gender: male
Ordered new motherboards
23.03.09 at 00:43:38
 
Or should I say used. I bought a pair of Epox 8KHA+ motherboards for $16 shipped. Im buying them as is. The seller couldnt test them with a processor, but said they both had a c1 post error on boot(I believe its a memory error) So Im thinking they might both work.

It looks like Ill be able to use either a pci or a agp 5500 card depending on what I have. the only thing Im worried about is the agp voltage. But hopefully everything will work out.   Smiley
Back to top
 

Voodoo 5500 AGP, Amd Barton 2600 187x11, MSI KT3 Ultra, Soundblaster Live 5.1, 768MB Ram
 
IP Logged
 
sb306
Full Member
***
Offline


I hate Nvidia!

Posts: 154
Fresno ca, U.S.
Gender: male
Re: Ordered new motherboards
Reply #1 - 02.04.09 at 05:14:24
 
Well, the boards showed up today and looked perfect. I installed 1 of them in my tower and it would power up, but no screen no boot with a ff(fully functioning) code. I swapped cpus and then it booted up but went to the c1 memory code that I was expecting. I swapped memory sticks in every slot, putting single sticks on the board to no avail.

So on to the next board. Same exact setup, no boot no video, with a ff(fully functioning) code. Swapping cpus didnt do anything. No memory gave the same result, as did no video card etc etc.

Then I pulled out a sdram mobo and tried that one with my cpus. Now, IT doesnt boot. aarrgghh. So now Im to the point that I really dont know what is working and what isnt. Im not sure if my memory sticks are good, or my processors, much less the motherboards.

Im starting to think that when my prior board died, that the cpu and/or the memory died with it.

Next step is going to be to get another stick of ram and see what happens. I guess Ill have to use process of elimination.

Ok. Im done venting   Sad
Back to top
« Last Edit: 02.04.09 at 05:15:11 by sb306 »  

Voodoo 5500 AGP, Amd Barton 2600 187x11, MSI KT3 Ultra, Soundblaster Live 5.1, 768MB Ram
 
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: Ordered new motherboards
Reply #2 - 02.04.09 at 18:46:17
 
Hi

Have you check the caps ?



Functionality symptoms:

Motherboard fails to POST.
Memory Test Fails.
System randomly and/or constantly reboots itself.
Fails to fully boot (or even install) Operating System.
System randomly and frequently freezes.
Random & frequent 'Blue Screens of Death'
BSoD or hard freeze under heavy drive activity (Either RAID, SCSI, or standard ATA)
CPU temps abnormally higher than usual under typical or less load.
*CPU VCORE & other system voltages are erratic or far out of tolerances.
Resetting the system after a freeze and the system will not repost.
(You have to completely power down then power back up.)


www.badcaps.net

Regards
Kokohemmo
Back to top
« Last Edit: 02.04.09 at 18:47:23 by Kokohemmo »  

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
sb306
Full Member
***
Offline


I hate Nvidia!

Posts: 154
Fresno ca, U.S.
Gender: male
Re: Ordered new motherboards
Reply #3 - 03.04.09 at 13:09:11
 
Visually, they all look good. The boards are like new. I just ordered a new memory stick and cpu. So hopefully that will give me another chance to see what the problem is.    Huh
Back to top
 

Voodoo 5500 AGP, Amd Barton 2600 187x11, MSI KT3 Ultra, Soundblaster Live 5.1, 768MB Ram
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print