Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Help getting voodoo 2 windows me to work (Read 103 times)
Wade Wortley
Guest


Help getting voodoo 2 windows me to work
25.05.06 at 04:35:27
 
Hi.  First time on this site and it looks like a good one.  I have a voodoo 2 and windows me.  I had this setup working great, but had to reload windows because I was getting errors ect..  I reinstalled drivers from the voodoo disk, and glide is no longer available.  In the system settings/control panel, it says the device is working properly, but also says no drivers are installed for it.  I click "find a driver" and it tells me that the best driver is already in place.  It seems like it needs to be "turned on" or something..  Can anybody help??  Thanks.
Back to top
 
 
IP Logged
 
LuxKiller65
God Member
*****
Offline



Posts: 680
Luxembourg
Gender: male
Re: Help getting voodoo 2 windows me to work
Reply #1 - 27.05.06 at 12:39:07
 
If you have an onboard graphics chip, disable it and then reinstall both your 2d and your Voodoo2 drivers. That's how I solved my problem, but it may be something else in your case.
Back to top
 
WWW  
IP Logged
 
Wade Wortley
Guest


Re: Help getting voodoo 2 windows me to work
Reply #2 - 28.05.06 at 19:57:06
 
Wink
Thank you!!!  I will give it a try and let you know.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print