3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Motherboards with Onboard 3dfx http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1134682380 Message started by NitroX infinity on 15.12.05 at 22:33:00 |
Title: Motherboards with Onboard 3dfx Post by NitroX infinity on 15.12.05 at 22:33:00
I'm looking for information on all motherboards with a 3dfx chip.
A-Trend ATC6253M V3 2000 16MB SDRAM Confirmed from manual A-Trend ATC6253M V3 3000 16MB SDRAM Confirmed from manual A-Trend ATC6254M V3 2000 16MB SGRAM Confirmed from manual A-Trend ATC6254-3 V3 3000 16MB SGRAM Confirmed from manual Gateway V3 1000 8MB SGRAM (Prototype) Saw (and saved) images of this one on VoodooAlert Forum, I think. Link: image Jetway J7BXAF Banshee 16MB SGRAM* MSI-6168 V3 2000 8MB SGRAM Confirmed from manual MSI-6168 V3 2000 16MB SGRAM Confirmed from manual Asus P3B-V V3 ??MB S?RAM A-Trend ATC6264M V3 ??MB S?RAM Gigabyte GA-6BXM V3 3000 8/16MB SGRAM got the manual, but it speaks of an ATi Rage Pro ?? * Quote:
Image of the card. Related links: Quote:
ATC 6253M ATC 6254M |
Title: Re: Motherboards with Onboard 3dfx Post by NitroX infinity on 17.12.05 at 10:28:29
Found this site: http://webhqnl.250free.com/atrend/manuals/
The manuals for above mentioned motherboards contain the following phrase in the "Voodoo III 2000/3000 Features" part: Quote:
LCDfx™ ;D |
Title: Re: Motherboards with Onboard 3dfx Post by Chosen_One on 17.12.05 at 13:49:39
the asus board never reached the market...i talked to an asus-employee and he told me that no board was given to a reseller...but i cannot say how many prototypes were made ;)
|
Title: Re: Motherboards with Onboard 3dfx Post by NitroX infinity on 17.12.05 at 14:22:38
I know it's a prototype, from the looks of things, so are the Jetway and Gigabyte motherboards, and offcourse the Gateway :P
|
Title: Re: Motherboards with Onboard 3dfx Post by NitroX infinity on 23.08.06 at 11:57:47
A kick to bring it under attention again.
Anyone know more about the Asus, A-Trend ATC6264M, Gateway, Gigabyte and Jetway motherboards? |
Title: Re: Motherboards with Onboard 3dfx Post by gdonovan on 27.08.06 at 05:12:55 wrote on 23.08.06 at 11:57:47:
A Quantum3D-Packard Bell-Ultracade It's for my garage =) |
Title: Re: Motherboards with Onboard 3dfx Post by jandarsun8 on 27.08.06 at 05:49:57
Well TM30 has got a board listed on 3dfx.ch pictures, not sure if it's the Jetway card though, it's what pulled up on hotbot.com when I did the search through them instead of google. Here's the link to that picture. http://www.3dfx.ch/gallery/v/3dfx_collectors/collectors_tm30/www+findings_+Photos+not+made+by+me/voodoo_board_hires.jpg.html
The Gigabyte one though is showing that it's an 8 meg sdram ATI Pro Rage card. At least the manual and drivers page on thier website is showing that. Looking for the other ones though. Found this, apparently Dell had an XPS T Series that had 3dfx cards in them but they weren't built in. Here's a link that I found with this list. http://www.rashly3dfx.com/information/company/oemfacts3.doc Everything else that is showing up for those boards that you have listed is for what "will be available for summer of 1999" but can't find listings for the actual boards though. |
Title: Re: Motherboards with Onboard 3dfx Post by st4r4m4m4 on 27.08.06 at 11:22:38 wrote on 27.08.06 at 05:49:57:
Gateway proto... The dude who owns the sample in the pic wont sell it :P (thow he is not a 3dfx fan/collector afaik) |
Title: Re: Motherboards with Onboard 3dfx Post by jandarsun8 on 27.08.06 at 17:22:17
Ah, ok. Wasn't sure what it was, it's what pulled up when I ran that search.
|
Title: Re: Motherboards with Onboard 3dfx Post by st4r4m4m4 on 27.08.06 at 18:30:09
After a bit of work on the gateway mobo pic. and some search I enstablished that this board has 8MB of total graphics ram
4chips x 2MB (256K x 32b 2banks) at 8ns, fairly low clocked thingy. |
Title: Re: Motherboards with Onboard 3dfx Post by NitroX infinity on 27.08.06 at 18:32:44
Thanks :)
|
Title: Re: Motherboards with Onboard 3dfx Post by st4r4m4m4 on 27.08.06 at 18:44:31
Also this might be of some interest:
http://216.239.59.104/search?q=cache:3-lZN47H8iMJ:www.rashly3dfx.com/information/company/oemfacts3.doc+ATC6264M&hl=en&ct=clnk&cd=6 |
Title: Re: Motherboards with Onboard 3dfx Post by Chosen_One on 28.08.06 at 17:58:31
A-Trend ATC-6254-3 (3000 chipset - 16MB)
this is the official name of the v3 3000 16mb mainboard... |
Title: Re: Motherboards with Onboard 3dfx Post by NitroX infinity on 12.09.07 at 01:34:27
Megakick.
Found mention of another motherboard with onboard Voodoo: http://forum.voodooalert.de/thread.php?threadid=12775 A quick Google search leads me to believe this was an arcade board used in Anda Miro's 'Pump it up' arcademachines. http://channelbeat.com/products/dance/pump_it_up_series/312.html OMG, from 2004! |
Title: Re: Motherboards with Onboard 3dfx Post by TM30 on 12.09.07 at 02:24:10 wrote on 27.08.06 at 11:22:38:
i also wrote him an email last year (i think just before i posted the picture in my 3dfx gallery) ... He wanted to sell it to me for 2000 US$... a bit too much for my taste. Gary, its your turn ;) edit: uuuh *mega-blind*... the quoted post is dated a year ago... ooups... but nvm i think its important that everybody knows that YOU CAN buy it actually ;) |
Title: Re: Motherboards with Onboard 3dfx Post by gdonovan on 12.09.07 at 03:10:20 wrote on 12.09.07 at 02:24:10:
$2000? eww, what a crack-head. |
Title: Re: Motherboards with Onboard 3dfx Post by exxe on 12.09.07 at 09:31:47
3dfx Brazos
see maximum PC june 2002 (i have it here) 16MB Voodoo3 @ 200MHz i440bx Aureal Vortex Soundchip only 3 made |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |