3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> Marketplace >> [WTB] Aalchemy system or card(s) http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1199286351 Message started by RimmerDK on 02.01.08 at 16:05:51

Title: [WTB] Aalchemy system or card(s)
Post by RimmerDK on 02.01.08 at 16:05:51

Would like to purchase either an Aalchemy system with the 8164 card(s) or just the card(s).

Cheers!

/Rimmer, Denmark

Title: Re: [WTB] Aalchemy system or card(s)
Post by NitroX infinity on 02.01.08 at 16:08:36

There are two auctions on eBay regarding AAlchemy boards:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200188321435
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280188273536

Title: Re: [WTB] Aalchemy system or card(s)
Post by TM30 on 02.01.08 at 17:15:55

whats your offer for my Quantum 3D AAlchemy 8164 with new power board. keep in mind that with this powerboard you won't need a special PSU, a normal ATX power supply will do the job here. its working and i am thinking about to sell it. included is also a 20pin ATX power cable.

Title: Re: [WTB] Aalchemy system or card(s)
Post by RaverX on 02.01.08 at 18:01:56

That looks so cool :o
Does it work on a normal PC ?

Title: Re: [WTB] Aalchemy system or card(s)
Post by TM30 on 02.01.08 at 18:06:20

yes i think so. its a standard PCI connector.

Title: Re: [WTB] Aalchemy system or card(s)
Post by ps47 on 03.01.08 at 18:17:52

eee,not too sure about that.I think you need a compatible chipset to get it working..

Title: Re: [WTB] Aalchemy system or card(s)
Post by TM30 on 03.01.08 at 18:36:21

i don't think so... its a standard pci connector. and new mercury brick also runs in non L440GX boards...

i will post a pic this evening in the forum and ask hank if he can help me how to power up that thing.

than we will see

i found this in the manual

4.4. AA5 Specifications

[...]

Minimum System Requirements
• PCI 2.1 compliant system for AAlchemy QX PCI
• Pentium® II class or faster processor
• Available PCI expansion slot
• Microsoft Windows® NT 4.0 with Service Pack 4 (or later)
• VGA, multi-frequency compatible monitor

based on this information any PCI 2.1 compilant board will do the job

Title: Re: [WTB] Aalchemy system or card(s)
Post by OutOfRange on 17.01.08 at 13:26:48

still for sale for the right price ?

Title: Re: [WTB] Aalchemy system or card(s)
Post by TM30 on 20.01.08 at 02:38:02

make an offer...