3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> how could i make my v5 5500 to support wide screen http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1182177178 Message started by fantasyraider on 18.06.07 at 16:32:58

Title: how could i make my v5 5500 to support wide screen
Post by fantasyraider on 18.06.07 at 16:32:58

i just wanna to set my v5 5500 up to 1680*1050,but it seems up to 1600*1024.i tried to modified the inf file and found sth related to the resolution setup,but i did not know how to chang it ,can sb help?

Title: Re: how could i make my v5 5500 to support wide sc
Post by ultima on 18.06.07 at 17:26:37

one post about this would be enough I think. :)

Try setting the monitor to enable resolutions it doesn't officially support.

There is a marker for that somewhere in the normal display properties under advanced.

Maybe that will help.

Title: Re: how could i make my v5 5500 to support wide sc
Post by outlaw on 18.06.07 at 18:33:51

You can try either ultramon or powerstip that both (commercial) support custom resolutions.

Title: Re: how could i make my v5 5500 to support wide sc
Post by fantasyraider on 19.06.07 at 01:57:37

thanks,i'll try it