3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> Tech Talk >> Help with Voodoo Banshee http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1094815512 Message started by MintabiePete on 10.09.04 at 13:25:12

Title: Help with Voodoo Banshee
Post by MintabiePete on 10.09.04 at 13:25:12

I have a GA-630 series Voodoo Banshee that has been a terrific 16 mb card for me in quite a few computers. At the moment I have it running in an ECS K7S5A motherboard and it runs really good . Now is this a 1.5v card ? it doesnt say in the manual and could I run it at a pinch in an Epox EP-8RDA+ motherboard that will run 8x or 4x at 1.5v ? Until I get another Video Card

Thanks

Title: Re: Help with Voodoo Banshee
Post by DenisF on 10.09.04 at 13:36:18

Depends on the type of the card [agp/pci]

If it's a PCI, it can run on anything. otherwise it will only run on universal agp slots, or agp2x slots.

Title: Re: Help with Voodoo Banshee
Post by MintabiePete on 10.09.04 at 13:42:00

Sorry it is an AGP ;D

OK thanks , means I cant use it if it is 3.3v

Title: Re: Help with Voodoo Banshee
Post by MintabiePete on 11.09.04 at 03:19:02

Thanks for that information :)looks like it stays with the K7S5A and I look around for another card .