3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
This & That >> Marketplace >> [Sold]mx200 (use voodoo3 chip)
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1274703279

Message started by frank-bao on 24.05.10 at 14:14:39

Title: [Sold]mx200 (use voodoo3 chip)
Post by frank-bao on 24.05.10 at 14:14:39
last one, cheaper to sell. sell as it is


Title: Re: [S]mx200 (use voodoo3 chip)
Post by exxe on 24.05.10 at 19:47:09
again no minimum price >:(

Title: Re: [S]mx200 (use voodoo3 chip)
Post by Narmounet on 24.05.10 at 23:13:46
Cheaper ? What about 30€  :P ?

Title: Re: [S]mx200 (use voodoo3 chip)
Post by frank-bao on 25.05.10 at 00:07:07
50 euros for card..thanks all 8-)

Title: Re: [S]mx200 (use voodoo3 chip)
Post by frank-bao on 26.05.10 at 04:36:39
50 euros to sell for card

tell me which location you are in and i can check the price for shippment

:)

Title: Re: [S]mx200 (use voodoo3 chip)
Post by frank-bao on 27.05.10 at 07:12:04
come on, focus......

>:(

Title: Re: [S]mx200 (use voodoo3 chip)
Post by frank-bao on 27.05.10 at 09:54:00

Narmounet wrote on 24.05.10 at 23:13:46:
Cheaper ? What about 30€  :P ?


ok,end time is this sunday. if nobody bid it,it belongs to you

but where are you from? i should check the shippment.thanks :(

Title: Re: [S]mx200 (use voodoo3 chip)
Post by Narmounet on 27.05.10 at 17:01:38
I'm from France !
But I relly think thats somebody will bid as it's a curious card ;)

Title: Re: [S]mx200 (use voodoo3 chip)
Post by frank-bao on 31.05.10 at 02:22:11

Narmounet wrote on 27.05.10 at 17:01:38:
I'm from France !
But I relly think thats somebody will bid as it's a curious card ;)


ok, nobody bid as it is yours.

i checked the shippmeng ,it is about $45=35euros

are you willing to deal this card?

Title: Re: [S]mx200 (use voodoo3 chip)---Auctions
Post by NitroX infinity on 31.05.10 at 12:55:46
Note: this might not be a V3 disguised as an MX200!

The card with the blue PCB from the other auction turned out to be a regular Geforce2 MX200.
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1274222015

Title: Re: [S]mx200 (use voodoo3 chip)---Auctions
Post by frank-bao on 31.05.10 at 13:04:06

NitroX infinity wrote on 31.05.10 at 12:55:46:
Note: this might not be a V3 disguised as an MX200!

The card with the blue PCB from the other auction turned out to be a regular Geforce2 MX200.
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1274222015


the chip has been polished to mx200 chip,of course modify the chip name, actually it is fake mx200 chip, v3 chip is carved to mx200 chip.

two cards have same board shape, same components,same design and same chip.they are twins. :)

Title: Re: [S]mx200 (use voodoo3 chip)---Auctions
Post by Narmounet on 31.05.10 at 21:06:18
Hum wait, if I understand well :
NitroX you received the cards : one was a MX200 with a Voodoo3 chip but the other one is a Geforce 2MX200 ?  :o

I'm ok for buying a  curios voodoo3 for 65€, but not a regular Geforce 2  :-/


Title: Re: [S]mx200 (use voodoo3 chip)---Auctions
Post by NitroX infinity on 31.05.10 at 21:17:53
According to frank, the company removed the V3 info from the chip and put the GF2MX info on it. I'm still wondering why they would not do that to all those fake cards.

Title: Re: [S]mx200 (use voodoo3 chip)---Auctions
Post by frank-bao on 01.06.10 at 00:43:52
in 2000, 3dfx is down ,but a lot of v3 chips in stock, however, at that time,nvidia mx200 is very popular in the market and the price is expensive depend on its performance.

some manufactory was using v3 chip with cheaper price to modify mx200 to get more profits, that is why not all of them were changed to. Actually it is illegal by law, it trick the people,but money is god for them.therefore, sb did it.

i get them in 2001 with three pieces and test very well.all of them display mx200, but you can use third party software to check it is v3 chip indeed.

i said before, i keep them for a long time,not sure if it is working well today coz no right motherboard with agp1x,2x (3.3v) to test them, maybe they are dead,maybe they are ok, sell as it is.

i am not tricker at all, i was 3dfx fans ever and spend a lot of money and energy on them.Now i have to retire coz no time focus on them.

I hope all of you guys  could understand me ,thanks all.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.