Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Canopus Pure3D and Voodoo Rush polka dot problem (Read 110 times)
sigtau
Junior Member
**
Offline


I'm Obsessed with 3Dfx!!!

Posts: 86
Houston, TX USA
Gender: male
Canopus Pure3D and Voodoo Rush polka dot problem
23.12.08 at 06:10:16
 
I own two 3dfx cards that have a problem with polka dots appearing in the  rendered textures.  Basically, it looks like someone spray painted various colors on all or most of the rendered surfaces.  I've seen this on a Voodoo Rush (Intense 3D) and Voodoo 1 (Pure3D) cards.  I own duplicates of each and they don't display the same error, so I assume it's a hardware problem. 

I'm sure there's no way to fix it, but I'm curious to know what is causing the problem?  Bad memory? Overheated Chips? 

Sigtau
Back to top
 
 
IP Logged
 
Tim
God Member
*****
Offline



Posts: 1065
Gender: male
Re: Canopus Pure3D and Voodoo Rush polka dot problem
Reply #1 - 23.12.08 at 10:01:28
 
Dots are usually overheating or bad GPU's. I would assume that applies to 3dfx cards as well.
Back to top
 
 
IP Logged
 
RaVeNsClaw
YaBB Newbies
*
Offline



Posts: 47
Germany
Gender: male
Re: Canopus Pure3D and Voodoo Rush polka dot problem
Reply #2 - 23.12.08 at 12:23:32
 
I've got the same problem with 2 "2 the Max" Voodoo2's.
But only with SLI at 1024!
Back to top
 

I'm sorry for my bad English! ;-D
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Canopus Pure3D and Voodoo Rush polka dot problem
Reply #3 - 23.12.08 at 21:23:58
 
Try UNDER-clocking the cards a bit...sometimes works! Wink

If not then it's bad RAM or a damaged Bruce/Chuck chip... Undecided
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print