3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl General Section >> General Discussion >> V4500 AGP 1.5V compatible? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1429409475 Message started by RaptorZX3 on 19.04.15 at 04:11:15

Title: V4500 AGP 1.5V compatible?
Post by RaptorZX3 on 19.04.15 at 04:11:15

i'll have an ATX board soon (Asus TUV4X, Tualatin-compatible) and i wonder if the V4500 AGP is truly AGP 4x 1.5V compatible?

While it may not run at 4x, i just wonder if it's safe to use with that voltage on the board.

thank you for the info.

Title: Re: V4500 AGP 1.5V compatible?
Post by Thandor on 19.04.15 at 09:30:43

Yes, it is 1.5V-compatible.

Title: Re: V4500 AGP 1.5V compatible?
Post by msdos on 19.04.15 at 22:18:06

RaptorZX3 wrote on 19.04.15 at 04:11:15:

not 4x compatible you say

or do you mean you motherboard, the manual says it has agp pro x4 support. also lowering voltgae will also ways be safe, weather it's stable or not is a hole other thing.

Title: Re: V4500 AGP 1.5V compatible?
Post by NitroX infinity on 20.04.15 at 12:51:10

3dfx Voodoo4 4500 AGP cards are AGP4x @ 1,5Volt.

Voodoo4's from other companies are not compatible with AGP 4x @ 1,5V. They are AGP 2x @ 3,3Volt.

Title: Re: V4500 AGP 1.5V compatible?
Post by Strauchdieb on 13.11.15 at 12:22:41

The Voodoo 4 L-Card only works with 3,3V.
The normal 3dfx Voodoo 4 Card works with 1,5V and 3,3V.

Title: Re: V4500 AGP 1.5V compatible?
Post by anthony on 23.11.15 at 21:07:36

all vsa100 chips are support 1.5v. if vsa based card don't support 1.5v it only means configuration pins set to 3.3v power only. you can always switch it as you like. no problemo