3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> decked out my 3dfx system http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1300146427 Message started by msdos on 15.03.11 at 00:47:07 |
Title: decked out my 3dfx system Post by msdos on 15.03.11 at 00:47:07
so I went to microcenter and got sum stuff for my 3dfx rig
got it all decked all out I got for it Cooler Master Elite 430 Case 1gig of kingston ddr-400 ram (should have gotten another 512 stick) I got Scythe Slip Stream fans for my new rig and gave it's fans to it they were 2 red thermaltake thunderblade fans and 1 coolmax red fan also have a 2.66 P4 and a gold sound blaster live coming in the mail I'm also put a 200gb drive in it, that I have siting around doing nothing when I'm done setting it up it will be crammed full with games here are sum pic's http://www.overclock.net/attachment.php?attachmentid=196021&stc=1&d=1297916047 http://www.overclock.net/attachment.php?attachmentid=196022&stc=1&d=1297916047 http://www.overclock.net/attachment.php?attachmentid=196023&stc=1&d=1297916047 http://www.overclock.net/attachment.php?attachmentid=196024&stc=1&d=1297916047 I need to do sum better cable management with it |
Title: Re: decked out my 3dfx system Post by Quaker763 on 15.03.11 at 09:42:37
What OS are you using???? :-? Most glide games are win 98 and win 98 doesnt support more than 775 megs of RAM i think.. Heres a link
http://support.microsoft.com/kb/253912 If a computer that is running any of the versions of Windows that are listed above contains more than 512 megabytes (for example, 768 megabytes) of physical memory (RAM), you may experience one or more of the following symptoms: You may be unable to open an MS-DOS session (or command prompt) while Windows is running. Attempts to do so may generate the following error message: There is not enough memory available to run this program. Quit one or more programs, and then try again. The computer may stop responding (hang) while Windows is starting, or halt and display the following error message: Insufficient memory to initialize windows. Quit one or more memory-resident programs or remove unnecessary utilities from your Config.sys and Autoexec.bat files, and restart your computer. So if in win XP or an NT OS, You may have to use third party Drivers. Nice system BTW, Looks sweet. What Voodoo are you running??? |
Title: Re: decked out my 3dfx system Post by oldskool on 15.03.11 at 17:43:38
My win 98 runs fine with 1 gig of ram :)
|
Title: Re: decked out my 3dfx system Post by bucksavage on 15.03.11 at 19:00:24
I must concur with oldskool, when I ran Win98 on my rig, I had 768megs of ram, and it ran great.
|
Title: Re: decked out my 3dfx system Post by msdos on 16.03.11 at 00:30:18
I'm useing a moded version of win98 than can run wiht up to 4gb of ram
win2k sp4 and I'm looking for a linux os to put on it also it's a v5.5k |
Title: Re: decked out my 3dfx system Post by ultima on 16.03.11 at 07:43:29
can you post a link to that modded version of 98?? 4GB seems unussually high, do you know what they modded to get it to support that??
|
Title: Re: decked out my 3dfx system Post by msdos on 16.03.11 at 09:10:21 ultima wrote on 16.03.11 at 07:43:29:
it has a lot of moded drivers and what not I'll pm you a link |
Title: Re: decked out my 3dfx system Post by elfuego on 16.03.11 at 16:48:27 ms-dos wrote on 16.03.11 at 09:10:21:
Pls publish it, since thats something I never even heard about and I was (and still am) experimenting a lot with Win98 on modern machines. @oldskool - your DOS window will not work with 1024mb RAM :P |
Title: Re: decked out my 3dfx system Post by msdos on 16.03.11 at 17:36:16 elfuego wrote on 16.03.11 at 16:48:27:
http://www.h33t.com/details.php?id=8428b7b3c2623ceacc590573f28c09e737ee3286 dos7.1 supports 4gigs of ram you know |
Title: Re: decked out my 3dfx system Post by oldskool on 17.03.11 at 22:17:49
So I'm not actually playing Carmegeddon I and II on it then or DN3d. Strange sure feel like it works :P
It only shows 756mb of ram though tbh, I think I had to change some stuff to get it to work but I cant remember exactly what :-/ |
Title: Re: decked out my 3dfx system Post by elfuego on 20.03.11 at 15:31:26 ms-dos wrote on 16.03.11 at 17:36:16:
Very nice! I'm downloading it right now, lets see if it works! Thanks! |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |