3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> Tech Talk >> Let's try this again.
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1430157537

Message started by msdos on 27.04.15 at 19:58:57

Title: Let's try this again.
Post by msdos on 27.04.15 at 19:58:57
My last 3dfx system did not go well at all.
so let's try this again.

My new system will have the fallowing
abit vt7
4gb ddr400 ram
liqued cooled cpu and gpu
2 voodoo 2's in sli
ati x800gto
windows 2k

I should get started on it today.

Title: Re: Let's try this again.
Post by ultima on 27.04.15 at 23:01:41
Looks to be nice, but if ya ever need a system, I have a dual XP-M3000+ system for sale, is dual 2.2Ghz, 4GB ram, supports AGP 2x and zo on......

The cpu's can be easily clocked to 2.5Ghz fue to unlocked multiplier

Title: Re: Let's try this again.
Post by msdos on 28.04.15 at 15:24:38

ultima wrote on 27.04.15 at 23:01:41:
Looks to be nice, but if ya ever need a system, I have a dual XP-M3000+ system for sale, is dual 2.2Ghz, 4GB ram, supports AGP 2x and zo on......

The cpu's can be easily clocked to 2.5Ghz fue to unlocked multiplier

I wish I could use a dual cpu system, but I can not.
A few games I play do not agree with 2 cpu's it. That and any game I play that has SMP suport gets lower FPS with my voodoo4500.
That and I all ready have most the parts for this build. Just need a I/O plate and some ram heatsinks.
I will post pics later today.

EDIT:
The x800gto will use the same block that was on one of the piii in my last system. The cpu will have a frist gen ek supreme. I wanted to watercool the north bridge but I could not get it to look right with it being so close the the cpu and the stock abit sink looks pritty cool anyway.
I will be useing 4 120mm yate loons and a 140mm yate loon fan, all have red leds. All are pulling air into the case except for the fan on the 120mm hwlab radiator. I will be useing a 200gb WD satahdd and windows 2000.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.