3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> Napalm driver archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1321702889
Message started by gdonovan on 19.11.11 at 12:41:29

Title: Napalm driver archive
Post by gdonovan on 19.11.11 at 12:41:29
Hank was nice enough to give me a disc of Napalm drivers and BIOS files a few years back, I have just gotten around to sending it to Martin and he has it hosted.

http://www.falconfly.de/downloads/3dfxdrivers.rar

If you have an intel based V5-6000 you will need some of these drivers sets as the later napalm drivers do not support 3D operation on those models.

The above 460 mb file contains win9x, windows 2000 and BIOS files covering from March of 2000 to Dec 2000.

Use at your own risk of course!

I just did some intel board testing with a few sets, the July 2000 set worked and I had access to the control panel to control AA operation. 

Gary Donovan

Title: Re: Napalm driver archive
Post by goriath on 19.11.11 at 12:47:17
Really nice!

Many thanks to both :)

Title: Re: Napalm driver archive
Post by gdonovan on 19.11.11 at 13:16:43

Title: Re: Napalm driver archive
Post by osckhar on 19.11.11 at 13:44:21
@Gary,

Thanks for those files.

Talking about Intel V5-6000.
Here a benchmark I did with some of my V5-6000 cards.



- Oscar.

Title: Re: Napalm driver archive
Post by FalconFly on 25.11.11 at 12:10:14
Finally got around to integrate the Driver Set into the Archive, it's still linked into this thread for Q&A however :)

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.