3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Can this be a voodoo card? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1115300637 Message started by TM30 on 05.05.05 at 15:43:57 |
Title: Can this be a voodoo card? Post by TM30 on 05.05.05 at 15:43:57
my uncle found this card it the attic. it looks a bit like a V3 2000 but whats with that DVI?
|
Title: Re: Can this be a voodoo card? Post by gdonovan on 05.05.05 at 16:14:50
Hard to tell from the picture, could be anything (Velocity 4400 for example or an ATI Rage)
No "caps" at the end of the board by the ram chips either as a V3 would have. |
Title: Re: Can this be a voodoo card? Post by TM30 on 05.05.05 at 16:28:23
so no 3dfx card?
|
Title: Re: Can this be a voodoo card? Post by gdonovan on 05.05.05 at 16:44:29 wrote on 05.05.05 at 16:28:23:
Need more info, chances are it is not though. I also see a monitor decal/marking on the backplate which is something I have never seen 3dfx do. |
Title: Re: Can this be a voodoo card? Post by TM30 on 05.05.05 at 16:54:17
hmm... so this could be a rage128... it has also such ram layout as a V3
and probably some rage128'S have DVI. like this one... |
Title: Re: Can this be a voodoo card? Post by LuxKiller65 on 05.05.05 at 17:03:41
I guess you need to remove the heatsink to find out what it is.
:P |
Title: Re: Can this be a voodoo card? Post by NitroX infinity on 05.05.05 at 17:37:45
It looks like the card has an AGP4x connector, if you look closely. So it can't be a V3 :)
|
Title: Re: Can this be a voodoo card? Post by goriath on 05.05.05 at 17:52:12
No typical capacitors of V3 layouts
|
Title: Re: Can this be a voodoo card? Post by OutOfRange on 05.05.05 at 18:03:23
one simple way to find it out: remove the heatsink
|
Title: Re: Can this be a voodoo card? Post by TM30 on 05.05.05 at 18:21:56
done.
its a rage 128 |
Title: Re: Can this be a voodoo card? Post by LuxKiller65 on 05.05.05 at 21:18:39
Better luck next time!
;D |
Title: Re: Can this be a voodoo card? Post by Obi-Wan_Kenobi on 05.05.05 at 23:33:35
though I've never seen a Rage 128 with a nice DVI like that before, still nice to have TM30 :)
|
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |