3dfx Archive - 8464DB Sixteen VSA-100 chips, 1 GB of Memory

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › 8464DB Sixteen VSA-100 chips, 1 GB of Memory

(Moderators: NitroX infinity, gdonovan, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1 2

8464DB Sixteen VSA-100 chips, 1 GB of Memory (Read 629 times)

exxe God Member Offline ^^ Posts: 1316 germany	Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory Reply #15 - 06.07.08 at 13:05:11 my system with one card have sticker 8232 and also the driver says 8232
Back to top	IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory Reply #16 - 06.07.08 at 16:47:03 Tried running the NVsensor board by itself as a primary device, nothing! It doesn't even power up... must get a feed from the AA5 board.
Back to top	Rampage is alive! IP Logged

gamma742

God Member

Offline

3Dfx Gamer

Posts: 1668
San Diego, CA USA
Gender: male

Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory
Reply #17 - 06.07.08 at 22:39:20

NitroX infinity wrote on 06.07.08 at 11:15:35:

Now I'm not an expert but I thought the second number in 8x32 or 8x64 stood for the amount of cards?

If so, should your system not be called an 8264 system?
I'm only seeing two cards.

Well, you don't have to be an expert to understand the Q3D numbering scheme.. I'll let another member explain in the next post..

Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...

IP Logged

gamma742

God Member

Offline

3Dfx Gamer

Posts: 1668
San Diego, CA USA
Gender: male

Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory
Reply #18 - 06.07.08 at 22:45:52

sigtau wrote on 03.07.08 at 19:25:47:

-I've noticed the AA5 numbering system is often misinterpreted by folks. Often, the second number in the string is considered the number of boards in the "stack" by folks. It is in fact the number of pixels per clock cycle the board can render. The number of boards is indicated by a trailing "SB" or "DB". All this info came from the Q3D SX owner's manual. Here are a couple examples:

8132SB (1 pixel per cycle, 32mb/chip, single board)
8232SB (2 pixel per cycle, 32mb/chip, single board)

I'm not sure of the exact configs that were sold, but it looks like gamma742 scored the ultimate setup. I'm actually very curious to know how well the SLI config will run because I have a second functional 8232 single board w/power board and housing that I wouldn't mind adding to my system. I just need to find a set of SLI connectors that go between the cards. Anyone have a spare set;)

Sigtau

He may or may not be an expert himself, but he did impress me since he took the time to read the Manual.
I thought I was the only one (and maybe a few others) that read the Manuals Undecided

Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System. Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best...

IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory Reply #19 - 07.07.08 at 00:02:42 Okay, so it has to do with pixels but 1 pixel per cycle seems to be a weird number. Does not a single VSA-100 chip render in the Megapixels per cycle?
Back to top	My Blog IP Logged

Eye-Q God Member Offline Posts: 522 Germany Gender:	Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory Reply #20 - 07.07.08 at 00:09:15 A cycle means a clock cycle, and as the VSA100-chips run at 166 MHz (that's 166 million cycles in one second) it's 166 Megapixel per second, not per cycle.
Back to top	IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: 8464DB Sixteen VSA-100 chips, 1 GB of Memory Reply #21 - 07.07.08 at 00:12:25 Oh yeah. I need to lay of the tech discussions when it's late
Back to top	« Last Edit: 07.07.08 at 00:12:38 by NitroX infinity » My Blog IP Logged

Pages: 1 2

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page