3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> This & That >> Broadcom NetXtreme Gigabit Ethernet drivers http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1335597384 Message started by bucksavage on 28.04.12 at 09:16:24

Title: Broadcom NetXtreme Gigabit Ethernet drivers
Post by bucksavage on 28.04.12 at 09:16:24

I'm looking for drivers for a BCM5750 ethernet card. Not sure what my mainboard is, but it uses the ATI IXP 400 setup, with RS480 northbridge and the sb400 southbridge. I've looked all over and find similar drivers for the 5751 and others, but they won't run the card.

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by bucksavage on 03.05.12 at 20:59:34

Does anyone have any ideas where to find the drivers? I still have had no luck whatsoever.

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by NitroX infinity on 03.05.12 at 21:26:56

Can you post a photo of your motherboard?

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by bucksavage on 04.05.12 at 04:49:22

I night be able to. Anything I can tell you about it otherwise? I can also add that the 5750 is onboard, not an add-in card.

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by bucksavage on 04.05.12 at 09:30:26

I forgot to mention the following two points about my PC: It is a HP, and has an MSI 09AC mainboard, using the chipset I stated earlier.

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by NitroX infinity on 04.05.12 at 11:23:01

Nevermind the motherboard, thought the ethernet was integrated.

Googling BCM5750 gave me this;
http://forums.driverguide.com/showthread.php?t=48936

Which has a link to these WinXP drivers;
http://members.driverguide.com/driver/detail.php?driverid=1478814
(the green download button is the correct download button)

Title: Re: Broadcom NetXtreme Gigabit Ethernet drivers
Post by bucksavage on 05.05.12 at 05:19:02

yeah that driver worked! I googled this before and got that page as well but didn't realize that that driver was what I needed. Thanks for your help, I appreciate it!