3dfx Archive - 3dfx pictures thread

Obi-Wan_Kenobi Ex Member	Re: 3dfx pictures thread Reply #45 - 09.04.07 at 02:08:06 3dfx Voodoo 4 4500 AGP 32MB Sealed EUR
Back to top	IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: 3dfx pictures thread Reply #46 - 27.04.07 at 17:44:49 looks broken 16MB DDR SG-RAM Daytona
Back to top	« Last Edit: 27.04.07 at 17:53:29 by exxe » IP Logged

gtxe Junior Member Offline v56k user Posts: 54 germany Gender:	Re: 3dfx pictures thread Reply #47 - 27.04.07 at 19:29:45 Quote: looks broken 16MB DDR SG-RAM Daytona ... but it shoud be easy to repair...
Back to top	IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx pictures thread Reply #48 - 27.04.07 at 20:06:43 Intel V6k 1500_A1 (fully functional) + Old Voodoo Volts: Oscar
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

Obi-Wan_Kenobi

Ex Member

Re: 3dfx pictures thread
Reply #49 - 27.04.07 at 20:22:59

woah! that's a nice one oscar and just look at all of those reworks Crikey mate!! Grin

also got a nice ultra high res pic of it with the Voodoo Volts or a pic of your 3 babies Cheesy

3dfx Voodoo 5 6000 AGP 128MB Rev.A1 1500 + Large Legacy Voodoo Volts
3dfx Voodoo 5 6000 AGP 128MB Rev.A2 2600
3dfx Voodoo 5 6000 AGP 128MB Rev.A 3700 + Late Voodoo Volts

Back to top

« Last Edit: 27.04.07 at 20:27:58 by N/A »

IP Logged

Kokohemmo YaBB Newbies Offline Posts: 47	Re: 3dfx pictures thread Reply #50 - 27.04.07 at 21:23:07 Hi Osckhar, I agree with Obi about those reworks... That must have been the engineer worst nightmare to get it work by doing so many hopping wires... Very cool 8) Regards Kokohemmo
Back to top	Epox 8K3A+ Athlon XP 3200+ 333Mhz @ 2.33Ghz 3dfx Voodoo5 6000 Rev. 3700A 2 x 1GB Kingston ValueRAM PC2700 CL 2.5 2 x WD Caviar SE 160GB 7200RPM (RAID 0) Realtek Family Network card IP Logged

Obi-Wan_Kenobi Ex Member	Re: 3dfx pictures thread Reply #51 - 27.04.07 at 21:25:42 hey oscar made any HeadShots in UT yet with it BOOM HEADSHOT! haha always fun
Back to top	IP Logged

MrFossey Junior Member Offline \o/ Posts: 76	Re: 3dfx pictures thread Reply #52 - 27.04.07 at 21:37:04 Very nice Oscar . Do you have bigger / better photo's available?
Back to top	IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: 3dfx pictures thread Reply #53 - 02.05.07 at 22:03:37 I received my 5500 pci today, here's a picture
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

Obi-Wan_Kenobi Ex Member	Re: 3dfx pictures thread Reply #54 - 03.05.07 at 00:25:56 heh cool ultima welcome to a greater world aka 3dfx Modern SLI for PCI 8)
Back to top	« Last Edit: 03.05.07 at 00:28:13 by N/A » IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: 3dfx pictures thread
Reply #55 - 04.05.07 at 09:24:49

thanks.

Gonna install the thing tommorrow and see what I can get outta her.

Wonder what she'll be scoring in benchmarks, and how much of that score will actually be due to the card.

Should get really nice fps in glide games, as it will be combined with an opteron @ 3.0Ghz and 1GB of DDR600.

Really a shame that no Athlon64 motherboard supports agp 4x.

Otherwise people could plug a 6000 into an A64 3700+ rig and then the 6000 would no longer be starving for data.

Back to top

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

Mansfield Full Member Offline Voodoo 2 SLI - the cheapest and the best SLI Posts: 212 Finland Gender:	Re: 3dfx pictures thread Reply #56 - 04.05.07 at 11:00:00 today I took a closer look to my broken V2 and found the problem. a broken connector (the pic looks weird because I used a magnifying glass to get better picture)
Back to top	Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&& IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: 3dfx pictures thread Reply #57 - 18.05.07 at 18:35:38 hey guys, I put some new heatsinks on my 5500 pci, looky here. whatta ya guys think??
Back to top	« Last Edit: 18.05.07 at 18:38:41 by ultima » 3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

paulpsomiadis

God Member

Offline

-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male

Re: 3dfx pictures thread
Reply #58 - 18.05.07 at 20:40:46

@exxe - it's a VERY easy fix for your Daytona.

The inverse U track can simply be bridged across with some fine wire - this will bypass the U shape entirely (and both places where the trace is broken)

As for the other track adjacent to this - just solder a wire from the top half to the bottom and bypass the break.

@Mansfield - a bit more difficult, but possible for your broken V2!

Use a fine tipped FLAT watch screwdriver, or a long needle to CAREFULLY bend the pins into position.

You will then need to use a 0.5mm or 0.25mm soldering iron tip to solder them back onto the board. (no extra solder will be required - these boards have all the extra solder you'll need already on them!)

Good luck you guys!

@Ultima - glad to see your MOD went well, very kewl!

Back to top

« Last Edit: 18.05.07 at 20:41:23 by paulpsomiadis »

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+

IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: 3dfx pictures thread Reply #59 - 19.05.07 at 11:19:01 yeah, I'm glad it went ok as well. gonna see how far she'll go with this. Already let it run @ 183Mhz, no problems whatsoever. benchmarkscores are up ofcourse, but...pci is a limiting factor. gonna do the same to my agp version.
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

	Welcome, Guest. Please Login