3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Production V4 with LCD connector!
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1087855349

Message started by gdonovan on 22.06.04 at 00:02:29

Title: Production V4 with LCD connector!
Post by gdonovan on 22.06.04 at 00:02:29
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5102785105

Other bidder was going heavy towards the end but I had deep reserves on this one. I bet the seller was surprised to see all the action at the last minute.

Anyone know who archon-online is?

My most expensive card to date, so far ;-)

Title: Re: Production V4 with LCD connector!
Post by FalconFly on 22.06.04 at 00:27:41
Hm, never seen that name on 3dfx related Ebay auctions.

Nice buy on that Mac Voodoo4 :)

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 22.06.04 at 05:34:47

wrote on 22.06.04 at 00:27:41:
Hm, never seen that name on 3dfx related Ebay auctions.

Nice buy on that Mac Voodoo4 :)


1) Seen the name a few times during auctions

2) Never laid eyes on one before with LCD plug, the 5500 of course but never a V4500.



Title: Re: Production V4 with LCD connector!
Post by paulpsomiadis on 22.06.04 at 06:25:02
If yer' gonna' flash it for PC use, be sure to backup the original BIOS first! ;)

Nice card! ;D

Title: Re: Production V4 with LCD connector!
Post by Rolo01 on 22.06.04 at 09:52:26
Is there a PC bios for that card that has DVI support ?

Title: Re: Production V4 with LCD connector!
Post by janskjaer on 22.06.04 at 14:21:04
I've seen a few of these cards flying about, I just never noticed how rare they are!  :)

I suppose buying the card for 3dfx collection purposes is justified, but if it was purely to run a V4 on a flat screen, it would be cheaper to get a DVI adapter, which is much cheaper.

However, I take it this is for collection purposes! ::)

Regarding that archon-online, he also had a bid on that IBM V4 that FalconFly won.


Title: Re: Production V4 with LCD connector!
Post by gdonovan on 22.06.04 at 14:52:36

wrote on 22.06.04 at 14:21:04:
However, I take it this is for collection purposes! ::)


Yup and since I have obtained a few cards fairly on the cheap due to pure luck I don't mind paying extra for one time to time.

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 24.06.04 at 19:49:49


Picture for the hardware ID guide!

Build date 37-00
Bios 1.3.3 MAC

Title: Re: Production V4 with LCD connector!
Post by fish on 24.06.04 at 22:40:09

wrote on 22.06.04 at 00:02:29:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5102785105

Anyone know who archon-online is?

My most expensive card to date, so far ;-)


I was quite sure that I will get the card - damn!

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 25.06.04 at 01:04:56
Your unfortunate luck that-

1) I was watching it.

2) I wanted it.

3) Didn't win a V4200 16 meg.

4) Had money burning a hole in my pocket.

My final reserve on the auction was $251


Title: Re: Production V4 with LCD connector!
Post by fish on 25.06.04 at 17:34:18

wrote on 25.06.04 at 01:04:56:
Your unfortunate luck that-


My final reserve on the auction was $251


Holy shit, that's quite a lot. So perhaps next time.

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 25.06.04 at 22:05:47
I considered flashing the card but have a PC V4 PCI already. Why risk damaging the card due to an opps?

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 27.06.04 at 02:44:22

wrote on 26.06.04 at 09:59:21:
If you want to flash the V5 5500 Mac in order to use it in a Pc, the bios exists.
If this bios is compatible with a V4 4500 Mac, i don't know.
If you fail (don't forgot to save the original mac rom), i'm not sure that again you will be able to flash the Card.

Imho, this is a great risk for a rare and expensive Card.


That's why I don't intend to flash the card, I'd rather buy a mac to run it.

Gary, live from the windy city via laptop with dsl!

Title: Re: Production V4 with LCD connector!
Post by gdonovan on 08.07.04 at 14:37:40
Don't know if I mentioned it or not- I did try this in a PC since PCI is PCI and can't hurt the card as far as I know.

1) Monitor will not power up on boot if only VGA device.

2) Installed on PC with 2 video cards (and it's the secondary device) Windows will detect it and ask for drivers. After rebooting in system manager the card will be there but windows reports an error.

The "fix" for use in a PC would be to flash the card to a regular PC V4 bios or even perhaps the bios from the prototype LCD/VGA V4 card one of the board members has but I have no intentions of doing so.

Just passing along some notes...

Gary

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.