3dfx Archive - Voodoo 4 mod from 32 to 64 MB RAM: finaly, succes!

gtxe

Junior Member

Offline

v56k user

Posts: 54
germany
Gender: male

Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc
Reply #105 - 29.03.07 at 11:56:50

There is a driverbuildin screen-capture-hotkey (Amigamerlin 3.1-R11):

The sceenies look the same as in the game (brightness and colors).

I have done some more benches:

Descent 3 @ 200MHz, 2xAA (I did the bench like described in 3dcenter.org): 51.71 fps

All benches are done on a Pentium III 850MHz, Win2k, 512MB RAM, 1024x768x16bit

Back to top

IP Logged

Obi-Wan_Kenobi

Ex Member

Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc
Reply #106 - 29.03.07 at 13:35:44

omg @ 200Mhz the 4500 is very impressive with max FSAA Shocked

nice one there mate. hmm that screen capture key in't supported with the 3dfx tools for 98SE, the one I'm using now is from AmigaMerlin 2.9 for 98SE combined with 3dfx Voodoo4/5 V1.04.00 aka the latest Official 3dfx WHQL driver.

I used the AmigaMerlin 3dfx tools because it has much more usable settings for the 5000 AGP to make use of

still no Screen Capture key within it, that would be a nice fix for a newer 3dfx Tools control panel for 98SE people.

Back to top

IP Logged

Chosen_One

Senior Member

Offline

Keeper of the BIOS-files...

Posts: 499
Germany
Gender: male

Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc
Reply #107 - 31.03.07 at 12:33:06

@st4r4m4m4: where did you get the bios? are they from the real 4800 with & without dvi or did you modify them by yourself?
inside the bios i read two different stings...the first says "Voodoo4 4500 BIOS - Version 1.15" & "Voodoo4 4800 with TV and LCD support BIOS - Version 1.11" in hex....in the string you can read in the postscreen the bios says "Voodoo4 4800 BIOS - Version 1.15" and "Voodoo4 4800 with TV and LCD support BIOS - Version 1.11"

so are they real or modded?

Back to top

3dfx BIOS-Database

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #108 - 08.04.07 at 10:13:20 very impressive the performance improvement. Can u post pics with the moded card ? I'm interessted to see the cooling solution. It's a cooper cooler ? 210 MHz solud work with the 5 ns memory and cooper cooler. Radu.
Back to top	IP Logged

gtxe Junior Member Offline v56k user Posts: 54 germany Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #109 - 09.04.07 at 16:51:40 If I get the camera again, I will post new photos. It's an aluminum cooler. The backside is cooled too. It looks gigantic. 2 PCI-Slots (under the AGP-Slot) can't be used anymore Even at 200MHz the card is cool. I think with a cooper cooler it will not be better.
Back to top	IP Logged

TM30 God Member Offline Posts: 1108 Germany Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #110 - 09.04.07 at 21:23:52 tried a vmod already?
Back to top	IP Logged

gtxe Junior Member Offline v56k user Posts: 54 germany Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #111 - 18.04.07 at 11:16:13 I don't want to continue the v4-64MB-200MHz-mod. It was just for testing. v5-128MB-200MHz-mod would be interesting now. But it's difficult (almost impossible) to get the right memory chips. Look at this topic: Regarding faster memory
Back to top	IP Logged

Mansfield

Full Member

Offline

Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male

Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc
Reply #112 - 14.09.08 at 17:18:48

so to do this it is only need to get 4 same type of ram then solder them on it and load new bios?
my V4 got toshibas F54044 mem
whoah I might do that for my V4, but it's my only one Undecided

so I doub could i risk it
does anybody know how to vmod V4?? Iwas thinking to do full scale modding for it ram, vmod, new cooling (if I only find suitable heatpipecooler Wink

) what else??
and V4 supports agp1.5v 4x speed so Ican use my asrock 775dual-vsta to build 3dfx gaming rig

Back to top

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&

IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #113 - 15.09.08 at 12:14:11 gtxe wrote on 19.03.07 at 16:18:38: some pics: here the KyroII with 32MB 6ns memory (done just for training). The card dosn't work anymore. Guys, I have a KyroII with 5ns ram, does that mean that theoretically I could fit my voodoo 5 with this ram and have 64MB of 200Mhz ram on there??
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #114 - 15.09.08 at 12:41:55 If it has 8 chips and your VSA-100 chips can run at those speeds, then yes.
Back to top	My Blog IP Logged

ultima

God Member

Offline

Always searching

Posts: 876
The Netherlands
Gender: male

Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc
Reply #115 - 15.09.08 at 12:53:04

well,

I checked and it has 8 chips with the following print:

SAMSUNG 118
K4S643232E-TC50

and I did already have my 5500 clocked at 183Mhz before, so ......one can only hope.

Have to check with someone if they can do the soldering for me, as I have neither the equipment not the experience to undertake such a thing.

Back to top

« Last Edit: 15.09.08 at 13:37:33 by ultima »

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4

IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #116 - 15.09.08 at 14:47:45 Would be interesting to run benchmarks that with 32MB would drag down the card (e.g. Aquamark 1 @ 24MB Textures with 2x FSAA). The difference between 32 and 64MB should be dramatic there.
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #117 - 15.09.08 at 15:27:52 actually,there are some test results available (v4 with 32mb vs v4 with 64mb),in case someone is interested.in certain situation,the speed boost is as high as 285% one of the cz guys has both v4 with 32mb and v4 with 64mb..
Back to top	« Last Edit: 15.09.08 at 15:35:29 by ps47 » 3Dfx Help Page / 3Dfx Game Guide IP Logged

Mansfield Full Member Offline Voodoo 2 SLI - the cheapest and the best SLI Posts: 212 Finland Gender:	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #118 - 17.09.08 at 17:23:44 What other video cards have same type memory that V4 use, someone said that he took memory from Kyro. so would like GF 2MX has V4 compatible memory
Back to top	Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&& IP Logged

Rolo01 Full Member Offline Posts: 191	Re: Voodoo 4 mod from 32 to 64 MB RAM: finaly, suc Reply #119 - 17.09.08 at 18:45:59 Some Geforce2MX cards have compatible memory, for example a special V7100Pro from Asus. The card has to look like this : http://cgi.ebay.de/ASUS-V7100-Pro-GeForce-2-MX400-zwei-Video-OUT-4x-AGP_W0QQitem...
Back to top	IP Logged

	Welcome, Guest. Please Login