3dfx Archive - VSA-100 A0 Revision: 100MHz

NitroX infinity

YaBB Moderator

Offline

Posts: 1936
The Netherlands
Gender: male

VSA-100 A0 Revision: 100MHz
20.04.05 at 08:45:21

Just found this article which tells a nice story about the A0 revision of the VSA-100. Here's an excerpt:

Quote:

The Voodoo 5 above is based on the version A0 VSA-100 silicon, it still has some bugs in it and it can't run on the speed that it's supposed to do. The final Silicon (which is going into mass-production quite soon) will run on 166MHz compared to the 100 MHz A0 version that was presented to me.

Another nice bit of information just below that piece:

Quote:

Since we're on the subject power-consuming, I've been able to verify that the VSA-100 processor will take up about 15-17 WATT.

YAY! Learned two things already today and I've only been out of bed for like 1 hour Grin

Back to top

« Last Edit: 20.04.05 at 08:45:40 by NitroX infinity »

My Blog

IP Logged

Obi-Wan_Kenobi

Ex Member

Re: VSA-100 A0 Revision: 100MHz
Reply #1 - 20.04.05 at 13:24:46

hey Nitrox nice work, would you like to show me where you got this info from an url or so, I would like to read the whole article

And oh not to foreget I have done something for you at my website x-3dfx.com, you wanted a listing of all Rev's and PCB dates right well< ivé mannaged Voodoo4, 5 and Spectre

http://www.x-3dfx.com/modules.php?name=Forums&file=viewtopic&t=23

all date are correct, there are a few cards i do know thet they were planned but the dates of them are not available yet.

Regards,

Obi-Wan Kenobi the x-3dfx Jedi Master.

Back to top

IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: VSA-100 A0 Revision: 100MHz Reply #2 - 20.04.05 at 13:34:45 Quote: Just found >>>>>LINK>>>>> this <<<<<LINK<<<<< article which tells a nice story about the A0 revision of the VSA-100. [...]
Back to top	« Last Edit: 20.04.05 at 13:34:55 by NitroX infinity » My Blog IP Logged

Obi-Wan_Kenobi

Ex Member

Re: VSA-100 A0 Revision: 100MHz
Reply #3 - 20.04.05 at 14:16:52

lol that's not the first Voodoo5 board mate

That's nothing but a Voodoo5 5000 PCI Rev.A1 0900 Wink

The First Voodoo5 evermade was dated back to Rev.A0 4499, yes week 44 year 1999. that's this model:

The Dual head Voodoo5 5500 AGP it runs at 100Mhz cores/mem because 3dfx was afraid of burnouts and so on., normally there would be cool blocks on the VSA-100's.

Back to top

IP Logged

Chosen_One Senior Member Offline Keeper of the BIOS-files... Posts: 499 Germany Gender:	Re: VSA-100 A0 Revision: 100MHz Reply #4 - 20.04.05 at 14:32:17 and this dual head v5 5500 has a v5 6000 bios...in my opinion it is strange but gary said it is quite normal for prototypes
Back to top	3dfx BIOS-Database IP Logged

gdonovan

YaBB Administrator

Offline

Infernal Collector

Posts: 2361

Re: VSA-100 A0 Revision: 100MHz
Reply #5 - 20.04.05 at 15:31:21

Quote:

The Dual head Voodoo5 5500 AGP it runs at 100Mhz cores/mem because 3dfx was afraid of burnouts and so on., normally there would be cool blocks on the VSA-100's.

1) Actually there was issues getting the boards to run in SLI mode, the slower clock speeds makes it a bit easier to sync the chips.

2) Most proto cards do not come with heatsinks as they get in the way during frequent rework in the lab, they used temporary heatspreaders that were easy to remove during debugging.

Back to top

Rampage is alive!

IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: VSA-100 A0 Revision: 100MHz Reply #6 - 20.04.05 at 15:39:54 Quote: and this dual head v5 5500 has a v5 6000 bios...in my opinion it is strange but gary said it is quite normal for prototypes Yes, I have seen a bunch of early protos running a "6000" bios, and these were all lab cards. I think that bios was just the most refined hence the most used.
Back to top	Rampage is alive! IP Logged

Chosen_One Senior Member Offline Keeper of the BIOS-files... Posts: 499 Germany Gender:	Re: VSA-100 A0 Revision: 100MHz Reply #7 - 20.04.05 at 20:45:04 and it is useable on a real 6000 right?
Back to top	3dfx BIOS-Database IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: VSA-100 A0 Revision: 100MHz Reply #8 - 20.04.05 at 23:52:21 Quote: and it is useable on a real 6000 right? Have not tried & would not waste my time- The latest 6000 bios is 1.16 or 1.18 and most of the early bios are .27 & .31. No sense going back.
Back to top	Rampage is alive! IP Logged

Obi-Wan_Kenobi

Ex Member

Re: VSA-100 A0 Revision: 100MHz
Reply #9 - 21.04.05 at 03:29:21

I have 1.18 on my Rev.A 2500 Voodoo5 5500 AGP, I suppose it would be the latest bios for all Voodoo5 cards, unless there is a 1.19.

my Rev.A 2300 had Bios 1.06 which is seen on many older 5500's. I also see that extra flap of PCB on that dual Head 5500, that must be hard to get off, I mean how tough is PCB?

is PCB a type of plastic , that aslo wonders me, because PCB looks and feels alot like hard plastic or that is it's protective shield.

Back to top

« Last Edit: 21.04.05 at 03:32:45 by N/A »

IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: VSA-100 A0 Revision: 100MHz Reply #10 - 21.04.05 at 05:02:30 Quote: my Rev.A 2300 had Bios 1.06 which is seen on many older 5500's. I also see that extra flap of PCB on that dual Head 5500, that must be hard to get off, I mean how tough is PCB? Actually it's pre-cut, I could snap it off with very little pressure.
Back to top	Rampage is alive! IP Logged

omega_supreme Full Member Offline Posts: 220 Netherlands Gender:	Re: VSA-100 A0 Revision: 100MHz Reply #11 - 21.04.05 at 11:29:31 Please dont do that
Back to top	powered by voodoo 5 6000 IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: VSA-100 A0 Revision: 100MHz Reply #12 - 21.04.05 at 13:15:31 Quote: Please dont do that Had no plans to do so...
Back to top	Rampage is alive! IP Logged

	Welcome, Guest. Please Login