3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> compaq 3500 http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1166251088 Message started by Speed 12 on 16.12.06 at 07:38:08

Title: compaq 3500
Post by Speed 12 on 16.12.06 at 07:38:08

Does anyone have the driver for that card or can you use the standard v3 3500 drivers-a link for them would be helpful.

Title: Re: compaq 3500
Post by FalconFly on 16.12.06 at 13:33:33

It should use the normal 3dfx Drivers found here.

(from memories I assume your CompaQ Voodoo3 3500 does not have the TV tuner of the 3dfx Voodoo3 3500/TV)

Title: Re: compaq 3500
Post by gdonovan on 16.12.06 at 14:39:05

wrote on 16.12.06 at 13:33:33:

It should use the normal 3dfx Drivers

I can confirm that!

Title: Re: compaq 3500
Post by Speed 12 on 16.12.06 at 19:56:22

yeah it has no dvi out but a tv out(no tv tuner)

Title: Re: compaq 3500
Post by ps47 on 16.12.06 at 23:33:09

the card should accept normal v3 drivers,its basically a higher clocked voodoo3 3000 (vga-out,tv out).

Title: Re: compaq 3500
Post by TM30 on 23.12.06 at 21:49:29

I used Amigamerlin 2.9 (Win98 ) and it worked fine!