3dfx Archive - AGP.5 Release.

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: AGP.5 Release. Reply #30 - 11.07.12 at 19:43:11 glad something nice came out of this. too bad I can't afford one right now.
Back to top	3Dfx Help Page / 3Dfx Game Guide IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: AGP.5 Release. Reply #31 - 30.07.12 at 21:07:13 Only 2 available. Once sold those 2 I will not build more. Regards, Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: AGP.5 Release. Reply #32 - 22.08.12 at 19:08:34 Hi Oscar, the adapter works perfectly At first the adapter didn't work using PCI Slot 4 even with different INT settings, but it works without problems on Slot 1. Both power supply modes work. Here a view pictures from the adapter and the testrun:
Back to top	IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: AGP.5 Release.
Reply #33 - 23.08.12 at 11:09:44

Ren did very good work. Adapter works very stable.

NEWS:

New release is comming very soon since a Spanish group ordered me 10 samples.

Some nice features:

- AGP.5 LE TURBO
- New PCB design
- 66MHz enabled by default
- Limited Edition - Desgined for V5-6000 users.
- And more...

And the most important- price for adpater will be 75Euros. Batch of 15 samples.

I keep you informed.

Best regards,
Oscar.

Back to top

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: AGP.5 Release. Reply #34 - 23.08.12 at 19:17:46 sounds Great ! thanks Osckhar
Back to top	IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: AGP.5 Release.
Reply #35 - 24.08.12 at 08:17:34

I agree

My version will be low-end/low-cost. It features 66MHz, a very slim design and is reduced when it comes to the needed parts. Oscars version is the highend part

@Oscar: I'm also thinking about special brackets for the adapter that feature a VGA cutting. This way you can melt the adapter and the VGA card together so it can be easily mounted in a case. Two friends of mine could do the job. Of course we will need different types of brackets (5500 AGP, 6000 and so on).

Back to top

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: AGP.5 Release. Reply #36 - 24.08.12 at 09:09:49 The adapter should as slim as possible. if you mount the adapter later in an pci2pcie adapter you must modify the Pc case...that is a common problem
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: AGP.5 Release. Reply #37 - 01.09.12 at 16:54:58 Hi all, work continues and the signal traces for layer 1 and 4 are finished. The adapter is 0,5cm lower than the original design. -> Bottom Layer -> Top Layer
Back to top	IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: AGP.5 Release. Reply #38 - 05.09.12 at 18:02:08 great work guys
Back to top	3Dfx Help Page / 3Dfx Game Guide IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: AGP.5 Release. Reply #39 - 23.09.12 at 19:36:26 Damn time is running away ^^ But finally my design is ready:
Back to top	IP Logged

Cosmos YaBB Newbies Offline recent 3dfx enthusiast Posts: 16	Re: AGP.5 Release. Reply #40 - 04.10.13 at 14:58:56 I need one adapter : how much with shipping to France ? Thanks,
Back to top	IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: AGP.5 Release.
Reply #41 - 01.12.13 at 11:42:48

Hi,

New small batch is here. AGP3.0

This new version add:
New design
Jumper for set 33/66MHz
New hole to add a front/back small heatsink using holes from bracket. It is recomended if you want to use V5-6000 8xFSAA stable.
PCB better quality thickness PCB is 1.7mm instead of 1.29

AGP2.0 never saw the light since project was stopped. It had as important feature works by default 66MHz but not possible to set it 33MHz.

Here some fast pics:

BATCH 4 SAMPLES.

NEW HOLE FOR ADDING HEATISNK

TURBO JUMPER SET 33/66MHz

Now I need to soder components and test all the feautures work well.

Regards,
Oscar.

Back to top

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

ultima God Member Offline Always searching Posts: 876 The Netherlands Gender:	Re: AGP.5 Release. Reply #42 - 01.12.13 at 16:20:13 looks very nice and clean Oscar, I especially like the print-on that says: Limited Edition, Designed for V5-6000 Users
Back to top	3DFX Playrig: Aerocool Strike-X Air SuperMicro H8DAE Dual Opteron 280 @ 2.4Ghz (4 cores) 4 x 1GB PC3200 3DFX Voodoo5 5500MAC PCI WD 160GB ATA100/133 Diamond MonsterSound MX300 Windows2000 SP4 IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: AGP.5 Release. Reply #43 - 01.12.13 at 16:34:43 Nice work Osckhar !
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: AGP.5 Release. Reply #44 - 01.12.13 at 17:00:34 Wow it's a good adaptor and this time without selotape on pin 49b to put 66 MHz mode. So nice Oscar!
Back to top	IP Logged

	Welcome, Guest. Please Login