Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › 3dfx Section › Tech Talk › Vodoo 1 SLI...
(Moderators: FalconFly, NitroX infinity, gdonovan)
‹ Previous Topic | Next Topic ›
Pages: 1 2 
Send Topic Print
Vodoo 1 SLI... (Read 539 times)
amp
Ex Member
Re: Voodoo 1 SLI...
Reply #15 - 05.05.04 at 22:54:31  
Quote:
Hmm...good point amp! Wink

It would be sorta' like a Voodoo 1.5 actually! Tongue

Since there are TWO TMU's and TWO FBI's, whereas a Voodoo 2 would only have one FBI... Roll Eyes

(and for all the morons out there on the net, this has NOTHING to do with the FBI! FBI = Frame Buffer Interface) Roll Eyes Tongue


You must mean 2.5  Grin But also, when you consider the real-world conditions, the actual benefits of SLI are somewhat bogged-down, on both the V2 and the V5. Also, the FBI, if I'm correct, normally doesn't do as much work as the TMUs, so only having a single FBI vs. two wouldn't be a huge performance increase. I think this project is simply not worth the time, unless you have it, but I know I could be doing much better things (especially considering the cost of a couple V2s nowadays, and the better driver support).
Back to top
 
 
IP Logged
 
3Dfx-tweaker
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 17
Re: Vodoo 1 SLI...
Reply #16 - 08.05.04 at 18:01:36  
He I scanned my voodoo2 board yesterday.
But to really track every line in the board you have to take the chips of it. But I can say that they are heading for the Ramdac, and 2 or 3 ar going to the FBI.
Back to top
 
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Vodoo 1 SLI...
Reply #17 - 08.05.04 at 22:24:48  
Yah, well it's a NO GO then! Tongue

Unless someone has a DEAD quantum V1 SLI board and LOTS of spare time with some de-soldering braid and a multimeter... Roll Eyes

...PHEW, no thanks! Shocked
Back to top
 
-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
3Dfx-tweaker
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 17
Re: Vodoo 1 SLI...
Reply #18 - 08.05.04 at 23:22:28  
Wel, I can find a dead V2. But mainly we need to now what exactly every pin of a FBI chip and the ramdac chip does. If we know that it won't be that hard.
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge