3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> 6pin connector on Q3D V2
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1224960779

Message started by exxe on 25.10.08 at 21:52:58

Title: 6pin connector on Q3D V2
Post by exxe on 25.10.08 at 21:52:58
did anyone know for what the 6pin connector or maybe jumper is?


its on all Q3D  V2 also the 2440 arcade version
http://www.tdfx.de/pic/obsidian2_90-2440_05.JPG
down direct on the PCI connector

the x24/16 have also one near the TV-out
the agp direct on the medusa

Title: Re: 6pin connector on Q3D V2
Post by Kaitou on 26.10.08 at 19:09:34
Maybe for Fans?

Title: Re: 6pin connector on Q3D V2
Post by OutOfRange on 27.10.08 at 20:42:15
if it is connected to the bios, it also can be an ISP interface  8-)

Title: Re: 6pin connector on Q3D V2
Post by gdonovan on 28.10.08 at 11:38:05

exxe wrote on 25.10.08 at 21:52:58:
did anyone know for what the 6pin connector or maybe jumper is?


For programming the xlinx chip.

Title: Re: 6pin connector on Q3D V2
Post by exxe on 28.10.08 at 11:50:58
okay many thx

did you know what the xlinx chip do on the board
if i understand right this chip can do anything, like a CPU

Title: Re: 6pin connector on Q3D V2
Post by gdonovan on 28.10.08 at 22:42:34

exxe wrote on 28.10.08 at 11:50:58:
okay many thx

did you know what the xlinx chip do on the board
if i understand right this chip can do anything, like a CPU


Correct- On Quantum3D they were used for  hardware security and identification.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.