3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl General Section >> General Discussion >> Voodoo 5 6000 Rev 2600 Response http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1275926256 Message started by edmundoab on 07.06.10 at 17:57:36

Title: Voodoo 5 6000 Rev 2600 Response
Post by edmundoab on 07.06.10 at 17:57:36

Hi All,

I am just curious how many of you here would be interested for me to list this prototype early?

when I say early, it means August to early September

Or would people be interested by the end of the year when they get their bonuses? In December

Title: Re: Voodoo 5 6000 Rev 2600 Response
Post by exxe on 07.06.10 at 18:11:31

wayne
if i buy a 2nd v5 6000 its one with Intel PCI Bridge

Title: Re: Voodoo 5 6000 Rev 2600 Response
Post by razrx on 07.06.10 at 18:26:05

if you wait too long, the Xmas money will be all gone. I start my shopping early to avoid the busy malls.

Title: Re: Voodoo 5 6000 Rev 2600 Response
Post by oldskool on 07.06.10 at 18:39:13

X-mas bills at the ned of the year.
I think anytime is good for selling a v5 6k though.

Title: Re: Voodoo 5 6000 Rev 2600 Response
Post by edmundoab on 08.06.10 at 03:15:36

Okay, well seems like listing earlier would be a better option

In that case, perhaps its better for me to take it over to China and ship from there.

As for the intel revision, man... i wanted to acheive that goal during the active collecting days, but I knew the price was just too much for me to handle..

Title: Re: Voodoo 5 6000 Rev 2600 Response
Post by edmundoab on 14.06.10 at 18:03:14

Just got a successful test on the card,
and it boots up just fine with a P3 setup

Most likely to list it in July
stay tuned