3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
General Section >> General Discussion >> Problems with integrated V3 filtering bug in Glide
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1144054831
Message started by GAI on 03.04.06 at 11:00:31

Title: Problems with integrated V3 filtering bug in Glide
Post by GAI on 03.04.06 at 11:00:31
I have a motherboard with integrated Voodoo 3. It is a regular V3 chip working on 143 MHz (V3 2000 reference), but only with 8 MB of RAM. The problem is, that there is some filtering bug in Glide games (see the picture below), but the D3D games are OK. I have tried 3 different drivers (original and 3rd party drivers too), but the problem is the same with all of them. What can I do? I want to use this board in my weekend house, and sometimes play with cool Glide games  8)

Title: Re: Problems with integrated V3 filtering bug in G
Post by gdonovan on 03.04.06 at 12:34:10
I have noted this as well, something to do with the 8 MB board configuration.

Title: Re: Problems with integrated V3 filtering bug in G
Post by GAI on 03.04.06 at 17:23:12
I installed a Velocity 100 driver, but no success  :(

Title: Re: Problems with integrated V3 filtering bug in G
Post by GAI on 06.04.06 at 17:37:50
OpenGL games are OK too. Only in Glide games can I notice this problem.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.