3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> Marketplace >> Garys stuff for sale all in one thread http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1140962068 Message started by gdonovan on 26.02.06 at 14:54:28

Title: Garys stuff for sale all in one thread
Post by gdonovan on 26.02.06 at 14:54:28

(This card NOT FOR SALE, just an example of bracket installed on V5-6000)

New support brackets, $3 each plus $2 shipping for up to 3 pieces. Mostly for V5-6000, 200SBi and 100SB but will fit other boards if not for function but cosmetics.

Only 10 or so left.

=======================================

24 brand new Voodoo II "Bruce" chips in plastic carrier, chips are dated 9810.

$35 air shipped to Europe, *total price* If you have US shipping address I can sell and ship for $26 total.

I have a few extra trays, I purchased a lot of them so I could frame a set for my office wall.

The plastic carrier is only 7 mm thick x 13.5 mm wide x 31.5 mm long.

=======================================

New 3dfx sealed keychains, only a few left.

Total cost shipped overseas via air-

For 1 keychain $5.00 USD
For 2 keychain $7.25 USD

=======================================

More pictures here: http://www.3dfx.ch/gallery/v/3dfx_collectors/collectors_gdonovan/album88/

Quicksilver II Voodoo 3 powered system, functional and complete. Please note this is NOT a Midway Hydro Thunder system but a system built for internal use from an ex-Quantum3D employee.

This is only the second such system I have seen outside of Q3D.

System specs are: Intel SS440BX2 motherboard, P3-500 CPU, 128 MB of Kingston PC-100 ram, Voodoo 3-3000, Intel 10/100B NIC, Sony CD-ROM, 10 gig WD hard drive and a Game Control Interface II.

Will consider offer or trade for items.

Gary

Title: Re: Garys stuff for sale all in one thread
Post by Obi-Wan_Kenobi on 26.02.06 at 15:17:38

Hey Gary I'm intrested in that black cooler ;) or was that card with that cooler just an example? hehe PM me if it's for real.

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 26.02.06 at 15:25:23

wrote on 26.02.06 at 15:17:38:

Hey Gary I'm intrested in that black cooler ;) or was that card with that cooler just an example? hehe PM me if it's for real.

The card is NOT for sale, just a picture to show the bracket installed.

Title: Re: Garys stuff for sale all in one thread
Post by gamma742 on 27.02.06 at 05:00:06

That's not QuickSilver #15 is it?

Is there a price or is it strickly for trade?

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 27.02.06 at 05:27:10

No it isn't Heavy Metal #15, 'just' a spare Quicksilver II system I picked up as part of a package deal.

Cash or trade.

Sorry I have not been able to check the unit out, it's been a real long weekend

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 04.03.06 at 17:05:23

This weeks packages have been shipped out this morning, all via air.

Gary

Title: Re: Garys stuff for sale all in one thread
Post by BFG3dfx on 04.03.06 at 18:09:15

any brackets left?

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 04.03.06 at 18:46:04

Yup.

Title: Re: Garys stuff for sale all in one thread
Post by BFG3dfx on 04.03.06 at 19:05:24

i'd like one, do you want me to pay you now or wait till i make another purchase?(and hold on to it till then)

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 06.03.06 at 00:55:08

Hang on to it for now bro, no rush for payment.

First post has been updated with Quicksilver II pictures and information.

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 19.03.06 at 15:13:24

Fixed links to new gallery.

Gary

P.S. I also have a Graphite that might be available if a buyer does not work out.

http://www.3dfx.ch/gallery/v/3dfx_collectors/collectors_gdonovan/ultracade_graphite/

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 22.07.06 at 15:18:14

More stuff for sale-

$75, includes cable.

Voodoo II 8MB $5

Quantum3d X-24 $20 (The mainboard works fine but the daughter board does not)

Title: Re: Garys stuff for sale all in one thread
Post by Lucidtomr on 04.08.06 at 05:08:47

Hi Gary...(I almost called you Gary Hobson -the guy who saves peoples lives from getting tomarow's news paper in Chicago -Early Edition) It makes me sad that you're selling your 3dfx stuff : /
If you're in a pinch, then I can see why you're selling.

I know when gamma742 sold me his v3 3500 tv I felt very bad, but I told him I'd take very good care of it and give it a good home......

BTW I know gamma742 was biding on ebay the other day for that card Quantum3d X-24. If you still have that I'm sure he'd be interested. I'm a little slow on the boards and news that goes around here, so sorry if I read it wrong or if your sale expirared.

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 04.08.06 at 13:40:45

wrote on 04.08.06 at 05:08:47:

I'm just selling some of the extras I have picked up here and there.

Title: Re: Garys stuff for sale all in one thread
Post by paulpsomiadis on 05.08.06 at 04:10:12

Is the damage to the X-24 daughter board visible or invisible. ???

If it's something visible (a specific component) I might buy it and have a go at repairing it... ;D

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 05.08.06 at 12:45:35

wrote on 05.08.06 at 04:10:12:

Is the damage to the X-24 daughter board visible or invisible. ???

If it's something visible (a specific component) I might buy it and have a go at repairing it... ;D

Nothing I can see, there was some green corrosion around some pins on one of the chips I cleaned off but it didn't change anything.

Title: Re: Garys stuff for sale all in one thread
Post by jandarsun8 on 10.10.06 at 18:44:24

Hey Gary, wondering on a couple of things. One, if you still have the quick silver II and graphite boxes available and two, any more keychains? Let me know what your kind of looking for on the boxes if you still have them as far as price goes. I don't have anything to trade for them unless your looking for something current.

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 10.10.06 at 19:09:12

Yes, I still have everything.

Title: Re: Garys stuff for sale all in one thread
Post by jandarsun8 on 10.10.06 at 22:49:42

I'm Just starting to get my collection going on what I want to get but I'm still in the dark on what alot of stuff is going for so is there any ideas on what your looking for as far as prices go for each machine or both together?

Title: Re: Garys stuff for sale all in one thread
Post by gamma742 on 19.12.06 at 15:44:11

wrote on 10.10.06 at 19:09:12:

Yes, I still have everything.

I need one of those "Support Bracket" and a V5 "Backplate" if you have one kickin' around in the Dodge Garage ;)

Title: Re: Garys stuff for sale all in one thread
Post by SAT+KABEL on 19.12.06 at 16:48:18

Are the brackets still available ?

And do you have the cable for the quantum3d cards ?

Title: Re: Garys stuff for sale all in one thread
Post by gdonovan on 19.12.06 at 16:57:52

I might have one or two support brackets left, I'll check tonight.

Title: Re: Garys stuff for sale all in one thread
Post by gamma742 on 19.12.06 at 17:05:34

I claim first dibs on a support bracket :D :P