3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl 3dfx Section >> 3dfx Drivers >> Control Panel (Tools) SFFT for Vista/7 ? http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1262993653 Message started by Kyrandia on 09.01.10 at 00:34:13

Title: Control Panel (Tools) SFFT for Vista/7 ?
Post by Kyrandia on 09.01.10 at 00:34:13

Hi guys, which utility/tool should i use for SFFT drivers (1.5 version) running in win 7/Vista evironment ?

I just need it to sed FSAA (enableb disabled 2x 4x)

Thank you

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by masterj85 on 09.01.10 at 02:04:42

I recommend you V-control. I think its the best tweaking tool for voodoos.

http://www.falconfly.de/downloads/v_ctrl-v181b.zip

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by Kyrandia on 10.01.10 at 16:42:28

too bad it doesn't work under Seven.. any other tool ?
With a working tool V5 is Seven Certified :D

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by ps47 on 10.01.10 at 21:39:25

Kyrandia wrote on 10.01.10 at 16:42:28:

it doesn't work under Seven..

try to be more specific.

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by Kyrandia on 11.01.10 at 00:28:17

the error reported is "application error" and application stops

i have tryed even on my i7 system

have you tryed it ?

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by Kyrandia on 11.01.10 at 00:33:15

drivers are SFFT 1.5 obviusly

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by tgod on 11.01.10 at 06:46:14

Have you tried compatibility mode?

Title: Re: Control Panel (Tools) SFFT for Vista/7 ?
Post by Kyrandia on 11.01.10 at 13:11:34

yep :)

no way up to now, any other control panel? i'll try